622376
9
Zoom out
Zoom in
Previous page
1/65
Next page
EDB6
V. 02 26/01/2016 9 ©Velleman nv
6. Power Supply
6.1 Transmitter
Refer to the illustrations [A] on page 4 of this manual.
1. Open the transmitter by pushing the interface at the bottom
using a flat screwdriver.
2. Install the battery (included) according to the correct polarity.
3. Close the transmitter or leave it open for installation (see
below).
Warning: Do not puncture batteries or throw them in
fire as they may explode. Do not attempt to recharge
non-rechargeable batteries (alkaline). Dispose of
batteries in accordance with local regulations. Keep
batteries away from children.
6.2 Receiver
Refer to the illustrations [B] on page 4 of this manual.
The receiver needs a 230 V~ power supply. Connect as follows:
1. Separate the front cover from the back.
2. Insert the power cable into the receiver via the cable hole.
3. Tie a knot in the cable.
4. Loosen the screws on the connection terminal. Insert the null
cable into the left cable connection and insert the live cable into
the right cable connection.
5. Tighten the screws on the connection terminal.
6. Replace the front cover on the back cover.
7. Connect the receiver to a 230 V~ power supply.
7. Mounting
Before drilling any holes into walls, please make sure there are no
cables or pipes that you may accidentally damage. It is also
important that the distance between the receiver and the transmitter
should be within the transmitting range (see technical specifications
below).
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Perel EDB6 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Perel EDB6 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 0,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info