493725
4
Zoom out
Zoom in
Previous page
1/23
Next page
CFRIG3
V. 01 – 23/02/2012 4 ©Velleman nv
c. Warming
The CFRIG3 is designed to keep warm food warm; not to warm up cold food. It will of course warm up cold food
when the food remains in an operating CFRIG3 for a sufficient amount of time. Hot meals will stay hot for a
while after the device has been switched off, provided the door remains properly closed.
On the right side of the device, set the function switch [2] in the HOT position. The red LED [1] will
light up.
Leave the device switched off for at least 5 minutes when switching from cooling to heating or vice versa.
6. Energy saving tips
To save energy in cooling mode, we recommend:
Place the device in a cool, dry spot away from direct sunlight or heat sources.
Always allow food to cool before storing it in the refrigerator.
Do not open the refrigerator more than necessary.
Do not leave the door open any longer than necessary.
7. Cleaning and maintenance
Switch the device off before cleaning and unplug it from the power supply.
Clean the device before using it for the first time.
Keep the device clean at all times.
Take a cloth and moisten it with lukewarm water to clean the device. Pay attention that no water drops into
the seals.
Do not use solvents, acids, abrasives, or any sharp tools to clean the device.
Dry the device off after cleaning.
Storage: If you are not going to use the device for a lengthy period of time, clean it and let it dry out
completely before storing it. Leave the door slightly open to prevent mould.
8. Troubleshooting
a. The CFRIG3 does not function (DC power) and the fan at the rear is not turning.
There is no power from the cigarette lighter. In most vehicles, the ignition has to be switched on for the
cigarette lighter to be supplied with current.
b. The ignition is switched on but the CFRIG3 does still not receive power.
Remove the plug from the socket and check if the cigarette lighter is not clogged with burnt tobacco. If this
is the case, clean it with a non-metal brush and solvent until the middle contact point is clean.
Check if the vehicle fuse for the cigarette lighter (5A/12V) isn't blown.
c. The cigarette lighter plug gets very warm.
Remove the plug from the socket and clean the socket.
The plug may not have been assembled correctly. Take it to an authorized dealer for repair.
d. The CFRIG3 does not cool satisfactorily and the fan at the rear is not turning.
The fan motor is probably defective. Take the device to an authorized dealer for repair.
e. The CFRIG3 does not cool satisfactorily but the fan at the rear is working.
The Peltier element is probably defective. Take the device to an authorized dealer for repair.
f. The CFRIG3 does not cool in AC mode
Is the power cable properly connected?
Is the cooling mode selected and is the green LED lit?
The integrated power supply is probably defective. Take the device to an authorized dealer for repair.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Perel CFRIG3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Perel CFRIG3 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 0,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info