493720

Perel CCTVSET10 Manual

16
Zoom out
Zoom in
Previous page
1/152
Next page
CCTVSET10
26/05/2011 ©Velleman nv
16
7.3.5.6 PTZ
Use the PTZ Setup menu to configure settings for a connected PTZ camera (not included).
NOTE: Consult the instruction manual of your PTZ camera for complete information about your
camera, including protocol and baud rate.
To configure a PTZ camera:
1) Connect a PTZ camera to the BNC and 485A (TX, +) and 485B (RX, -) ports and power outlet.
For more details on connecting a PTZ camera.
2) Under PROTOCOL, select PELCO-D or PELCO-P for the selected channel. Click NEXT PAGE for
additional channels (8-channel models only).
3) Under BAUD RATE, select 1200, 2400, 4800, or 9600.
4) Under DATA BIT select 5, 6, 7, or 8.
5) Under STOP BIT, select 1 or 2.
6) Under VERIFY, select ODD, EVEN, MARK, SPACE, or NONE.
7) Under ADDRESS, enter an address from 001~255 using the Virtual Keyboard. Refer to your
PTZ camera`s instruction manual for further details.
8) Click APPLY. Click CLOSE in the confirmation window.
9) Click EXIT in all menus until all windows are closed.
7.3.5.7 NETWORK
Use the Network Setup menu to configure your network and DNS settings.
Figure 2.4.2.18.1 network setup
UPNP
UPnP Forum is an industry initiative designed to enable simple and robust connectivity among
consumer electronics, intelligent appliances and mobile devices from many different vendors.
NOTE: the router needs to support UPNP function.
To configure UPNP settings:
1)
Enable the UPNP function in your Router.
2) Under DVR GUI, Open the MAIN MENU and click ADVANCE.
3) From the Advanced Setup menu, click NETWORK.
4) Under UPNP, select OPEN.
5) Click APPLY to save your settings and then click OK in the confirmation window.
6) Using a remote PC, open Internet Explorer.
7) In the address bar, enter your Router WAN IP address immediately followed by: WEB PORT (no
spaces).
http://XXX.XXX.XXX.XXX(Router WAN IP):XXX(WEB PORT)
8) Enter your system ADMIN password and select INTERNET.
NOTE: If you have not enabled passwords on the system, leave the password field blank.
9) Click LOGIN.
To configure network settings:
1) Under TYPE, select DHCP, PPPoE, or STATIC.
If DHCP, go to step 5. If PPPoE, go to step 2, if STATIC, go to step 3.
NOTE: DHCP allows you to quickly connect to your network by obtaining an IP address from the
router. After the initial setup, we recommend that you disable DHCP and set the IP address
between 1~100. For example, if your IP address is 192.168.0.107, change the last digits to
90 (i.e. 192.163.0.90). This ensures that port forwarding will not change in the event of
power failure or resetting of your network.
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Perel CCTVSET10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Perel CCTVSET10 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 4,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info