622120
4
Zoom out
Zoom in
Previous page
1/22
Next page
AC06
V. 03 22/02/2016 4 ©Velleman nv
3. General Guidelines
Refer to the Velleman® Service and Quality Warranty on the last pages of this manual.
Protect this device from shocks and abuse. Avoid brute force when operating the device.
Protect the device against extreme heat, dust and moisture.
Familiarise yourself with the functions of the device before actually using it.
All modifications of the device are forbidden for safety reasons.
Only use the device for its intended purpose. Using the device in an unauthorised way will void the
warranty.
4. Features
overload protection (for charger)
integrated ampere meter
for various motor cars, vans and light trucks
included accessories:
o charging cable (1.5 m + 1.5 m)
o two clamps
o 2 replaceable spare fuses
5. Overview
Refer to the illustrations on page 2 of this manual.
A
C
green LED
B
D
fuse (20 A)
6. Preparation
Always check the condition of the cables and clamps before using the
battery charger. Do not use when damage is noticed!
Disconnect the battery from the vehicle before charging. To do this, first remove the negative pole
connection, and then proceed with the positive pole connection.
When applicable (non-sealed battery), check the level of the battery acid. When necessary, add
distilled water.
Clean the poles with a steel brush or sandpaper.
Make sure the battery charger is not connected to the mains.
Connect the positive clamp of the battery charger (red) with the positive pole (+) of the battery.
Make sure the clamp is secured tight.
Connect the negative clamp of the battery charger (black) with the negative pole (-) of the battery.
Make sure the clamp is secured tight.
7. Operation
The status of the charging process is indicated by 3 LEDs on the front of the unit. Refer to the
illustration on page 2 of this manual.
When the battery charger is correctly connected to the battery, the red LED [A] lights up.
Otherwise, check the polarity of the connections and the fuse [D].
When the battery has filler caps, unscrew them before charging.
To start charging the battery, connect the battery charger to the mains. Make sure the correct mains
voltage is supplied (see technical specifications below).
The red LED [A] will remain on during the entire charging procedure.
The yellow LED [B] indicates that the battery charger is connected to the mains and the charging
procedure is ongoing.
If the yellow LED [B] does not light up, check the condition of the mains socket and the mains.
When the yellow LED [B] turns off during charging, the circuit was interrupted by the internal
transformer overload protection system. Disconnect the charger from the mains and allow it to cool
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Perel AC06 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Perel AC06 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 0,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Perel AC06

Perel AC06 Additional guide - English, German, Dutch, French, Portuguese, Spanish - 19 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info