664393
130
Zoom out
Zoom in
Previous page
1/156
Next page
7
Appendix
128
t Memo
In rare cases, the camera may not operate correctly due to
causes such as static electricity, etc. This can be remedied by
taking the battery out and putting it back in again. If the
camera operates correctly, it does not require any repairs.
Troubleshooting
Problem Cause Remedy
The camera does
not turn on.
The battery is not
installed properly.
Check the orientation of the
battery.
The battery power
is low.
Charge the battery.
The shutter cannot
be released.
The built-in flash is
being charged.
Wait until charging is finished.
There is no
available space on
the memory card.
Insert a memory card with
available space or delete
unwanted images.
Data is being
processed.
Wait until processing is
finished.
The lens aperture
ring is set to
a position other
than 9.
Set the lens aperture ring to the
9 position or select [Enable] in
[24 Using Aperture Ring] of the
E4 menu. (p.122)
The autofocus
mode is set to
x and the
subject is not
in focus.
Set the focus method to w
and adjust focus manually.
Autofocus does
not work.
The subject is
difficult to focus
on.
v cannot work well for low-
contrast objects (the sky, white
walls, etc.), dark colors,
intricate designs, rapidly-
moving objects, or scenery shot
through a window or a net-like
pattern.
Lock the focus on another
object located at the same
distance as your subject, then
aim at the target and take a
picture. Alternatively, use w.
The subject is too
close.
Move away from the subject
and take a picture.
The focus cannot
be locked.
f is set for [AF
Active Area] of
Live View.
Set [AF Active Area] to e, 0,
h, or i. (p.64)
The built-in flash
does not
discharge.
The flash mode is
set to A or B.
When the flash mode is set to
A or B, the flash does not
discharge if the subject is
bright.
Change the flash mode. (p.60)
The camera is not
recognized when it
is connected to a
computer.
The USB
connection mode
is set to [PTP].
Set [USB Connection] to [MSC]
in the D3 menu.
Dust or dirt
particles appear in
images.
The CMOS sensor
is dirty or dusty.
Activate [Dust Removal] from
the D5 menu. The Dust
Removal function can be
activated every time the camera
is turned on and off.
Refer to “Sensor Cleaning”
(p.129) if the problem persists.
Problem Cause Remedy
e_kb586_om.book Page 128 Wednesday, July 13, 2016 2:16 PM
130


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pentax K-70 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pentax K-70 in the language / languages: English as an attachment in your email.

The manual is 15,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pentax K-70

Pentax K-70 User Manual - German - 166 pages

Pentax K-70 User Manual - Dutch - 166 pages

Pentax K-70 User Manual - French - 166 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info