708112
97
Zoom out
Zoom in
Previous page
1/140
Next page
5
Sharing
95
You can perform tethered shooting with the camera connected
to a computer using the optional “IMAGE Transmitter 2”
software. Captured images can be directly saved to the
computer.
1 Set [USB Connection] to [PTP] in the D2 menu.
2 Turn the camera off.
3 Connect the camera to a computer using a USB
cable.
y Connecting the camera to a computer (p.94)
4 Turn the camera on.
5 Start “IMAGE Transmitter 2” on the computer.
“IMAGE Transmitter 2” is started and the computer
recognizes the camera.
u Caution
When the capture mode selector switch is set to C, tethered
shooting cannot be performed if a memory card is not
inserted in the camera.
t Memo
For details on “IMAGE Transmitter 2”, download and refer to
the latest version of the “User Guide [Operation]” available at
the following site.
http://www.ricoh-imaging.co.jp/english/support/
download_manual.html
During tethered shooting, the shutter release always has
priority regardless of the [AF.S Setting] setting of [Phase
Detection AF] and the [Contrast AF Options] setting of
[Contrast Detection AF] in the A1 menu. (p.57, p.59)
This camera has a built-in Wi-Fi™ function. By directly connecting to
a communication device such as a smartphone and tablet via wireless
LAN, the camera can be operated from the communication device and
images can be shared with others via social networks or e-mail.
The Wi-Fi™ function is disabled when the camera is turned on.
Enable the function using one of the following methods.
Setting from the menus (p.96)
Setting with the Smart Function (p.96)
When the Wi-Fi™ function is
enabled, the Wi-Fi lamp lights up and
the 7 (white) icon indicating the
wireless LAN status is displayed on
the status screen and Live View
screen. When 8 (gray) is displayed,
a connection with the communication
device is not established correctly.
t Memo
Even after the Wi-Fi™ function is enabled, it returns to an inactive
state when the camera is turned off and on again. Also, when the
camera enters
C
mode, the Wi-Fi™ function is disabled.
Auto Power Off is not available while a Wi-Fi™ connection is
established or images are being transferred. If Auto Power
Off is activated while a connection is not established, the
Wi-Fi™ function is disabled. The function is enabled when the
camera recovers from Auto Power Off.
The Wi-Fi™ function is disabled during the USB connection.
u Caution
Do not attempt to use the Wi-Fi™ function in a location where
the use of wireless LAN devices is restricted or prohibited,
such as on airplanes.
When using the Wi-Fi™ function, observe local laws and
regulations governing radio communication.
If a memory card with a built-in wireless LAN function (such as an
Eye-Fi card or a Flucard) is used, radio wave interference may
occur. When this occurs, disable the Wi-Fi™ function of the camera.
Operating the Camera with a Computer
Using the Camera with a
Communication Device
Enabling the Wi-Fi™ Function
1/
1/
250
250
1600
1600
F
F
5.6
5.6
99 999
99999
99 999
99999
97


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pentax K-1 Mark II at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pentax K-1 Mark II in the language / languages: English as an attachment in your email.

The manual is 14,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pentax K-1 Mark II

Pentax K-1 Mark II User Manual - German - 151 pages

Pentax K-1 Mark II User Manual - Dutch - 154 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info