579892
83
Zoom out
Zoom in
Previous page
1/165
Next page
83
Shooting Functions
4
3
Turn the Av dial to set the
exposure compensation step
while holding down the multiple
exposure / auto bracket button.
4
Hold down the shutter release button.
Three consecutive pictures will be taken, the first with no compensation,
the second with negative compensation, and the third with positive
compensation. The mode returns to the single-frame drive mode
automatically after the third picture is taken.
You can use the auto bracketing mode for only under-exposure or over-
exposure shots by combining the operation with exposure compensation
(p.79). The auto bracketing is performed in both cases on the basis of the
specified exposure compensation value.
By combining this function with consecutive shooting mode, you can take
consecutive auto bracketing shots for as long as you keep the shutter release
button pressed.
The focus is locked in the first frame position when the focus mode lever is set
to
l
(single).
The focus is adjusted for each shot when the focus mode lever is set to
k
(continuous). However, note that the shutter will release even if the focusing is
not complete.
The auto bracketing exposure setting will remain effective for twice as much
time as the metering timer (initial value 20 seconds) when you release your
finger from the shutter release button during auto bracketing, and you can take
the next picture at the next compensation step. In this case, auto focusing works
for each frame. After about twice as much time as the metering timer (initial
value 20 seconds), the camera returns to settings for taking the first picture.
You can combine this function with the built-in flash or external flash (TTL and
P-TTL auto only) to change only the flash light output consecutively. However,
when using an external flash, holding the shutter release button down to take
three continuous frames may cause the second and third frame to be taken
before the flash is fully recharged. Always take one frame at a time after
confirming that charging is complete.
You can change the auto bracketing sequence using a custom function.
See page 115 for setting Custom Functions.
Taking only over-exposed or under-exposed pictures
e
_
000
_
kb321
.
book
Page
83
Wednesday
,
August
27
,
2003
12:09
PM
83


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pentax istD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pentax istD in the language / languages: English as an attachment in your email.

The manual is 5,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pentax istD

Pentax istD User Manual - English - 2 pages

Pentax istD User Manual - German - 167 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info