16505
27
Zoom out
Zoom in
Previous page
1/33
Next page
49
To properly control the wireless slave, it is
necessary to set the wireless slave mode settings
for the camera being used.
Set to SLAVE1 when using the *ist, MZ-S or MZ-
L/MZ-6/ZX-L camera and to SLAVE2 for all others
cameras.
Setting function
Slide the setting switch up.
Press the illumination button [LIGHT] for 2
seconds or more.
SLAVE1 will be displayed.
Each time the Select button [S] is pressed, it
will switch in the order of SLAVE1 SLAVE2
SLAVE1.
Press the illumination button to end the setting.
If the AF360FGZ is set to SLAVE1 when used
with other than the *ist, MZ-S or MZ-L/MZ-6/ZX-
L, the flash will not operate.
If the AF360FGZ is set to SLAVE2 when used
with the *ist, MZ-S or MZ-L/MZ-6/ZX-L, the
AF360FGZ will operate and flash at the control
flash before the picture is taken.
In SLAVE 2, fluorescent lamps flicker may
contribute to flash units erroneous firing on
rare occasions.
WIRELESS SLAVE MODE SETTING
48
The channel of the camera and the flash unit should
be set to the same channel. If both channels do not
match, the wireless flash unit will not fire.
[Example] When channel is set to 3 CH..
AF360FGZ Channel Setting
Slide the setting switch down to the [yellow dot
side] and display the channel on the display
panel.
Press the channel setting button and set to
CH1, CH2, CH3 or CH4.
Slide the setting switch back up to the [white
dot side] after setting.
When the AF360AFGZ is attached to the
hotshoe of the camera and the power switch of
the camera and the flash unit is set to on, and
the shutter button is pressed halfway down, the
channel of the flash unit will be registered on
the camera side and become the same
channel.
The channel setting is to prevent confusion of
wireless signals between the *ist, MZ-S or MZ-
L/MZ-6/ZX-L and AF360FGZ being used by
other people. Set to a channel out of the 4 that
is not being used by others.
WIRELESS CHANNEL SETTING
LIGHT
ZOOM
READY
TEST
FORMAT
CH.
MODELING
HS
OFF
ON
SYNC.
WIRELESS
W
MCS
MODE
MODE
FORM
AT
WIRELESS
W
S
CH.
P-TTL
35mm
SLAVE
LIGHT
ZOOM
READY
TEST
FORMAT
CH.
MODELING
HS
OFF
ON
SYNC.
WIRELESS
W
MCS
MODE
MODE
FORMAT
WIRELESS
W
S
SLAVE
2 seconds
or more
1
1
2
3
4
2
3
4
2
3
1
1
3
2
PENTAX AF360 FGZ/1 BODY 4/15/03 11:26 AM Page 48
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pentax AF360FGZ at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pentax AF360FGZ in the language / languages: English as an attachment in your email.

The manual is 2,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pentax AF360FGZ

Pentax AF360FGZ User Manual - German - 96 pages

Pentax AF360FGZ User Manual - Dutch - 96 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info