579868
53
Zoom out
Zoom in
Previous page
1/68
Next page
52
2
P-TTL Auto Flash Photography
The amount of reflective light will change according to the
condition of the reflective surface, angle, and distance. Check
the flash output in the LCD panel of this flash unit when taking
pictures.
Manual Flash Photography
The amount of light during bounce flash photography is greatly
affected by the condition of the reflective surface, therefore test
pictures should be taken beforehand or changing the exposure
and taking several pictures may be recommended.
• When taking color photographs, if the reflective surface for
the bounce flash is colored, the picture will be affected by the
color and unless this is intentional, a white surface should be
used.
• Bounce flash photography is greatly affected by the
surrounding conditions. A photography manual and other
references are recommended.
n AF Spot Beam with LED
This flash unit features a built-in white spot beam projector of
LED to assist the autofocus system in dim light and
low-contrast conditions. When using the flash with autofocus in
such conditions, the spot beam will be projected automatically
depending on the ambient lighting conditions. This function is
activated only when the camera is set to autofocus.
1 Turn on the power switch (ON).
2 Press and hold the function button ( ).
3 Rotate the adjustment dial to display Sb on the LCD panel.
4 Press the setting button (SET) to blink 1/1, 1/2 or OFF.
1/1: Maximum brightness. (Default setting)
1/2: Minimum brightness.
OFF: Turn off AF spot beam.
5 Rotate the adjustment dial to select 1/1, 1/2 or OFF.
6 Press the setting button (SET) to complete the setting.
To exit the function menu, press and hold the function
button ( ).
7 Turn on the camera and set the camera to the autofocus
mode.
8 Press the shutter release button halfway down to let the AF
spot beam discharge.
The AF spot beam does not work in bright light conditions.
If the In-focus indicator does not light up in several
seconds, it means that the subject is hard to autofocus. In
this case, use the manual focus mode to focus on the
subject.
To change the composition, raise your finger off the
shutter release button and press it halfway down again to
recompose the picture.
When using this flash unit’s built-in AF spot beam, the
built-in AF spot beam of the camera will not operate.
The AF spot beam on the flash unit works accurately only
when mounted onto the camera’s hot shoe.
AF360FZ_540FGZ.book Page 52 Friday, December 20, 2013 6:11 PM
53


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pentax AF 360 FGZ II at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pentax AF 360 FGZ II in the language / languages: English as an attachment in your email.

The manual is 5,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pentax AF 360 FGZ II

Pentax AF 360 FGZ II User Manual - German - 68 pages

Pentax AF 360 FGZ II User Manual - Dutch - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info