523587

PENTAGRAM P1212-4 Manual

12
Zoom out
Zoom in
Previous page
1/14
Next page
Installation
Adapter installation
1. Shut down the operating system, then turn the computer off and disconnect it from
mains.
2. Open the computer case and locate an available PCI slot on the motherboard.
3. Insert the adapter into the PCI slot. Ensure that the card’s connector is placed securely
in the slot. It may be necessary to apply force to the card to ensure it is firmly seated.
Attach the adapter to the computer chassis with a screw. Connect the auxiliary power
connector with 4-pin molex mini. Close the case.
4. Turn the computer on and wait for the operating system to launch. Log on, if necessary.
5. If the Add New Hardware Wizard appears, click Cancel and follow steps on the next
page to install adapters drivers.
Driver installation
1.Insert the supplied CD into the CD-ROM drive. The startup menu should open
automatically. Under Windows Vista and Windows 7, you may need to click Run:
PentaSetup.EXE in the AutoPlay dialog. If the menu does not open automatically, select
Start > Run (under Windows Vista and 7: Start > All Programs > Accessories > Run). In the
Open field in the Run dialog, type
X:\PentaSetup.exe
(where “
X
” is the letter corresponding
to your optical drive), then press Enter.
2.During CD menu start, you may need to click Allow (Windows Vista) or Yes (Windows 7) in
the User Account Control dialog, and provide an administrative user name and password if
the current user does not have administrative privileges.
3.Click the Install button, to begin configuration wizard.
4.If it is necessary to reboot the computer, select Yes, I want to restart my computer
now, to restart the computer after the installation, or No, I will restart my computer later,
to restart the computer later.
5. Click Finish to complete the installer operation.
To verify the drivers are installed, go to “Control Panel->System->Device Manager”, in the
Universal Serial Bus controllers, hardware should be detected under the name “Electronics
Remesas USB 3.0 Host Controller” and “Electronics Renesas USB 3.0 Root Hub”.
5
… 12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for PENTAGRAM P1212-4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of PENTAGRAM P1212-4 in the language / languages: English, Polish as an attachment in your email.

The manual is 0,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info