PENTAGRAM horNet Wi-Fi USB [P 6132-12]
[Station] Wi-Fi Protect Setup Tab
This tab allows you to connect to WPS (Wi-Fi Protected Setup) compatible Access Point.
WPS was created in order to simplify connection process between wireless stations and
secured Access Points. User don't need to know any authentication or encryption settings used
by network – direct or indirect (contact with network administrator) access to the WPS
compatible AP is enough.
Caution: WPS is not a method to secure wireless network, only a method to effortlessly
connect wireless stations to already secured wireless network.
Two methods of WPS connecting are available: PBC method (Push Button Config) and PIN
method.
PBC method:
1. While on Wi-Fi Protect Setup tab, click on Push Button Config (PBC) button or press WPS
button on adapter's casing (release when new window appears).
2. Before progress bar reaches its end, press WPS button on AP's casing (for example router's),
or use corresponding function on its configuration page (details can be found in AP's or
router's manual).
3. If everything is OK, connection between adapter and AP will be established.
4. [Session Overlap] error means, that more than one AP in PBC mode was found. Retry after
few minutes or try PIN method.
15
