523572
23
Zoom out
Zoom in
Previous page
1/28
Next page
horNET P6121-L4 / P6122-12
23
WPS Tab
The primary goal of Wi-Fi Protected Setup (Wi-Fi Simple Configuration) is to simplify the
security setup and management of Wi-Fi networks. Ralink STA as an Enrollee or external
Registrar supports the configuration setup using PIN configuration method or PBC
configuration method through an internal or external Registrar.
WPS AP List – Display the information of surrounding APs with WPS IE from last scan result.
List information includes SSID, BSSID, Channel, ID (Device Password ID), Security-Enabled.
Rescan – Issue a rescan command to wireless NIC to update information on surrounding
wireless network.
Information – Display the information about WPS IE on the selected network. List information
includes Authentication Type, Encryption Type, Config Methods, Device Password ID,
Selected Registrar, State, Version, AP Setup Locked, UUID-E and RF Bands. Details can be
found in Detailed network information section.
PIN Code – 8-digit numbers. It is required to enter PIN Code into Registrar using PIN method.
When STA is Enrollee, you can use Renew button to re-generate new PIN Code.
Config Mode – Our station role-playing as an Enrollee or an external Registrar.
WPS Profile List – Display all of credentials got from the Registrar. List information includes
SSID, MAC Address, Authentication and Encryption Type. If STA Enrollee, credentials are
created as soon as each WPS success. If STA Registrar, RaUI creates a new credential with
WPA2-PSK/AES/64Hex-Key and doesn't change until next switching to STA Registrar.
Detail – Displays Credential information in secondary pane.
Connect – Command to connect to the selected network inside credentials. The active
selected credential is as like as the active selected Profile.
Rotate – Command to rotate to connect to the next network inside credentials.
Disconnect – Stop WPS action and disconnect this active link. And then select the last profile
at the Profile Page of RaUI if exist. If there is an empty profile page, the driver will select any
non-security AP.
Export Profile – Export all credentials to Profile.
Delete – Delete an existing credential. And then select the next credential if exist. If there is an
empty credential, the driver will select any non-security AP.
PIN – Start to add to Registrar using PIN configuration method. If STA Registrar, remember
that enter PIN Code read from your Enrollee before starting PIN.
PBC – Start to add to AP using PBC configuration method.
Caution: When you click PIN or PBC, please don't do any rescan within two-minute
connection. If you want to abort this setup within the interval, restart PIN/PBC or press
Disconnect to stop WPS action.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for PENTAGRAM P 6122-12 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of PENTAGRAM P 6122-12 in the language / languages: English as an attachment in your email.

The manual is 1,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info