523541

PENTAGRAM Cerberus Wi-Fi Lite P 6381-0 Manual

54
Zoom out
Zoom in
Previous page
1/64
Next page
Cerberus Wi-Fi Lite (P6381-0)
54
Default Gateway – This field displays the IP address of the gateway device.
DHCP Server – This field displays whether DHCP server is activated on the Wireless-G
Router.
MAC Address – This field displays MAC address of the LAN Interface.
WAN Configuration
Attained IP Protocol – This field displays the IP addressing type on the WAN interface.
IP Address – This field displays the WAN IP address.
Subnet Mask – This field displays the subnet mask associated with the IP address above.
Default Gateway – This field displays the IP address of the gateway device.
MAC Address – This field displays MAC address of the WAN Interface.
Help – Click Help to display on-line help information in a pop-up screen.
Management: DHCP Settings
The DHCP Settings screen allows you to set the Dynamic Host Configuration Protocol
(DHCP) server settings on the Wireless-G Router. A DHCP server automatically assigns an IP
address to each connected computer on the network. You must configure the computers to
automatically receive an IP address from the DHCP server (the Wireless-G Router) and make
sure there is no other DHCP server(s) on the same network. Click Management > DHCP
Settings to display the configuration screen.
Enable DHCP Server – Select this option set the Wireless-G Router to act as a DHCP server
providing IP address(es) to connected computers. Click this option to disable this feature. You
must then set up a DHCP server on the network or assign the computers fixed IP addresses.
DHCP Client Range – Specify the range of the IP address pool to assign the computers.
Note: The DHCP client IP addresses you specify here must be in the same subnet as
the LAN interface on the Wireless-G Router. When you change the LAN IP address in
the LAN Interface screen, these fields are automatically updated to be in the same
subnet.
Apply – Click Apply Changes to save the changes. The Wireless-G Router will reboot to
make the changes take effect.
Reset – Click Reset to undo the changes.
Dynamic DHCP Client IP – This table displays the information of the DHCP client(s) that is
assigned an IP address from the Wireless-G Router.
IP Address – This field displays the IP address assigned to a DHCP client.
MAC Address – This field displays the MAC address of the DHCP client.
… 54 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for PENTAGRAM Cerberus Wi-Fi Lite P 6381-0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of PENTAGRAM Cerberus Wi-Fi Lite P 6381-0 in the language / languages: English as an attachment in your email.

The manual is 0,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info