523541

PENTAGRAM Cerberus Wi-Fi Lite P 6381-0 Manual

31
Zoom out
Zoom in
Previous page
1/64
Next page
Cerberus Wi-Fi Lite (P6381-0)
31
Wireless: Wireless Advanced Settings
Click Wireless > Advanced Wireless Settings to display the configuration screen. The
default wireless settings in this screen work in most wireless network environment.
Authentication Type – IEEE 802.11b defines a basic authentication security using WEP
(Wireless Equivalent Protocol) keys.
• Select Open System if you don’t want to use a WEP key for authentication.
• Select Share Key to set the Wireless-G Router and the peer wireless devices to
authenticate each other with a WEP key.
• Select Auto to allow both open or shared authentication.
Note: The peer wireless device must also set to use the same authentication type.
Fragmentation Threshold – Specify the maximum packet size allowed before the Wireless-G
Router fragments data. If there are many error packets on the network, slightly increase the
threshold. Setting the threshold too low decreases network performance. Always make a small
change to the default settings.
RTS Threshold – The Wireless-G Router will send a Request To Send (RTS) packet to a
sending host. When an acknowledgement is received, the Wireless-G Router sends a Clear
To Send (CTS) packets to that host to allow data transmission. RTS/CTS eliminates the
“hidden node” problem where two hosts are within range of each other but does not know
each other’s presence. If the number of packets is lower than the RTS threshold, this feature
is not activated. If you are experiencing inconsistent data flow on the network, slightly reduce
this number.
Beacon Interval – A beacon packet is broadcast by the Wireless-G Router to synchronize the
wireless network. The beacon interval allows a wireless client in power saving mode to know
when to “wake up” and detect if there’s packet waiting to be received. Specify the time period
between beacon broadcasts.
Data Rate – Select a transmission rate the Wireless-G Router uses to send data. Select Auto
to allow the Wireless-G Router to use the maximum transmission rate possible.
Note: If you specify a transmission rate here, make sure the peer wireless devices must
also use the same rate for wireless communication.
Wireless network coverage – Select an option to set the wireless coverage range.
… 31 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for PENTAGRAM Cerberus Wi-Fi Lite P 6381-0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of PENTAGRAM Cerberus Wi-Fi Lite P 6381-0 in the language / languages: English as an attachment in your email.

The manual is 0,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info