523541

PENTAGRAM Cerberus Wi-Fi Lite P 6381-0 Manual

28
Zoom out
Zoom in
Previous page
1/64
Next page
Cerberus Wi-Fi Lite (P6381-0)
28
Wireless
Wireless: Wireless Basic Settings
Click Wireless > Wireless Basic Settings. Configure basic wireless settings in this screen.
Disable Wireless LAN Interface – Select this option to deactivate wireless capability on the
Wireless-G Router. No wireless connection is allowed.
Band – If your wireless network contains only IEEE 802.11b devices, select 802.1 B.
If your wireless network contains only IEEE 802.11g devices, select 802.1 G.
If your wireless network contains both IEEE 802.11b and IEEE 802.11g devices, select 802.1
B/G.
Mode – In addition to setting the Wireless-G Router as an AP (access point) bridging the
wireless and wired networks, you can also set the Wireless-G Router to other operating
modes.
• The Client mode allows you the use the Wireless-G Router as a wireless adapter for a
computer. This allows the computer to connect to a wireless network.
• To wirelessly bridge two wired networks, use the WDS mode.
• Select AP + WDS mode to set the Wireless-G Router to wireless bridge two networks
and work as an access point at the same time.
Note: If you set the Wireless-G Router in WDS modes, make sure you activate the
spanning tree protocol to avoid network loops.
Network Type – This field is applicable when you select Client in the Mode field. Select
Infrastructure to allow a computer to connect to a wireless network via an access point.
Select Ad-hoc to allow a compute to connect to another wireless-enable computer.
Site Survey – This button is applicable when you select Client in the Mode field and
Infrastructure in the Network Type field. Click Site Survey to open a screen displaying a list
of available wireless networks/devices within transmission range. You can set the Wireless-G
Router to connect to a wireless network/device.
SSID – An SSID uniquely identifies a wireless network. All devices in a wireless network must
use the same SSID to communicate with each other. Enter the name of a wireless network to
which the computer connects.
… 28 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for PENTAGRAM Cerberus Wi-Fi Lite P 6381-0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of PENTAGRAM Cerberus Wi-Fi Lite P 6381-0 in the language / languages: English as an attachment in your email.

The manual is 0,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info