523541

PENTAGRAM Cerberus Wi-Fi Lite P 6381-0 Manual

23
Zoom out
Zoom in
Previous page
1/64
Next page
Cerberus Wi-Fi Lite (P6381-0)
23
•
••
• Setup Wizard: Wireless Basic Settings
Configure basic wireless LAN and wireless security settings in the fourth Setup Wizard
screen.
Band – If your wireless network contains only IEEE 802.11b devices, select 802.1 B.
If your wireless network contains only IEEE 802.11g devices, select 802.1 G.
If your wireless network contains both IEEE 802.11b and IEEE 802.11g devices, select
802.1 B/G.
Mode – In addition to setting the Wireless-G Router as an AP (access point) bridging the
wireless and wired networks, you can also set the Wireless-G Router to other operating
modes.
• The Client mode allows you the use the Wireless-G Router as a wireless adapter
for a computer. This allows the computer to connect to a wireless network.
• To wirelessly bridge two wired networks, use the WDS mode.
• Select AP + WDS mode to set the Wireless-G Router to wireless bridge two
networks and work as an access point at the same time.
Network Type – This field is applicable when you select Client in the Mode field. Select
Infrastructure to allow a computer to connect to a wireless network via an access point.
Select Ad-hoc to allow a compute to connect to another wireless-enable computer.
SSID – An SSID uniquely identifies a wireless network. All devices in a wireless network
must use the same SSID to communicate with each other. Enter the name of a wireless
network to which the computer connects.
Channel Number – A channel is the operating frequency in which a wireless device
transmits data. The number of channels you can select varies depending on your
country’s regulation. Select a channel number the Wireless-G Router is to use for
wireless communication. To reduce interference, select a channel number that is further
away from what the nearest wireless device/network uses. For example, if the nearest
wireless device/network is using channel 6, set the Wireless-G Router to use channel 11.
Cancel – Click Cancel to start configuring the Setup Wizard again.
<<Back – Click <<Back to discard the changes and go back to the previous screen.
Finished – Click Finished to save the settings. The Wireless-G Router will reboot to
make the changes take effect.
… 23 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for PENTAGRAM Cerberus Wi-Fi Lite P 6381-0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of PENTAGRAM Cerberus Wi-Fi Lite P 6381-0 in the language / languages: English as an attachment in your email.

The manual is 0,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info