523539

PENTAGRAM Cerberus P 6381-3 Manual

33
Zoom out
Zoom in
Previous page
1/36
Next page
PENTAGRAM Cerberus P 6381-3
33
Problems with the Web Interface
I cannot access the web Interface:
1. Make sure you are using the correct IP address of the router. Check the IP address of the
router;
2. Your computer’s and the router’s IP addresses must be on the same subnet for LAN
access;
3. If you changed the router’s LAN IP address, then enter the new one as the URL;
4. Remove any filters in LAN or WAN that block web service.
Problems with the Login Username and Password
I forgot my login username and/or password:
1. The default username is “admin”. The default password is “pentagram”. The Password
and Username fields are case-sensitive. Make sure that you enter the correct password
and username using the proper casing;
2. If you ever forget the password to log in, you may need to restore the factory default
settings. Use the RESET button: While router is powered on, press and hold the Reset
button for about 10 seconds. Release the reset button and wait for the router to reboot.
Problems with LAN Interface
I cannot access the router from the LAN or ping any computer on the LAN:
1. Check the Ethernet LEDs on the front panel. A LAN LED should be on for a port that has
a PC connected. If it is off, check the cables between your router and the PC. Make sure
you have uninstalled any software firewall for troubleshooting;
2. Make sure that the IP address and the subnet mask is consistent between the router and
the workstation.
Problems with the Internet Access
I cannot access the Internet:
1. Make sure the router is turned on and connected to the network;
2. If the WAN LED is off, refer to Section WAN LED of this troubleshooting;
3. Verify your WAN settings;
4. Make sure you entered the correct user name and password;
5. For wireless stations, check that both the router and wireless station(s) are using the
same SSID, channel and encryption keys (if encryption is activated).
Internet connection disconnects:
1. If you use PPPoE, check the idle time-out setting;
2. Contact your ISP.
… 33 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for PENTAGRAM Cerberus P 6381-3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of PENTAGRAM Cerberus P 6381-3 in the language / languages: English as an attachment in your email.

The manual is 0,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info