523539

PENTAGRAM Cerberus P 6381-3 Manual

21
Zoom out
Zoom in
Previous page
1/36
Next page
PENTAGRAM Cerberus P 6381-3
21
Default Gateway: This is the IP address of the default gateway that allows for contact
between Wireless Router and the remote network or host.
Connect to DNS Server automatically: This field allows you to get the DNS IP address from
the remote network automatically.
DNS Server: This field indicates the IP address of DNS that Wireless Router contacts to.
User Name: This field is only available when you set WAN Connection Type as PPPoE or
PPTP.
Password: This field is only available when you set WAN Connection Type as PPPoE.
Idle Disconnect Time in seconds: Disconnect After time of inactivity (in seconds): This
field is optional and allows you to configure to terminate your ISP connection after a specified
period of time. This field is optional and allows you to end your ISP connection after the
specified time of inactivity. A value of zero allows infinite idle time. If Tx Only is checked, the
data from Internet will be skipped for counting idle time. If Tx Only is checked, Internet activity
such as downloading data, is not counted as idle time.
MTU: It means Maximum Transmission Unit (MTU) of PPPoE packet.
Heart-Beat or PPTP/L2TP (VPN) Server: Please enter the server name or server IP of the
authentication server of BigPond server.
Host Name: This field allows you to provide a host name for Wireless Router. It is usually
requested by your ISP.
MAC Address: This field allows you to provide a unique MAC address for Wireless Router to
connect Internet. It is usually requested by your ISP.
WAN / Port Trigger Tab
Port Trigger function allows you to open certain TCP or UDP ports to communicate with the
computers connected to Wireless Router. This is done by defining trigger ports and incoming
ports. When the trigger port is detected, the inbound packets to the specified incoming port
numbers are redirected to your computer.
Enable Port Trigger: Enable/Disable the port trigger.
Description: Enter the name of port trigger.
Trigger Port: This is the port used to trigger the application. It can be either a single port or a
range of ports.
(Trigger) Protocol: This is the protocol used to trigger the special application.
Incoming Port: This is the port number on the WAN side that will be used to access the
application. You may define a single port or a range of ports. You can use a comma to add
multiple ports or port ranges.
(Incoming) protocol: This is the protocol used for the special application.
… 21 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for PENTAGRAM Cerberus P 6381-3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of PENTAGRAM Cerberus P 6381-3 in the language / languages: English as an attachment in your email.

The manual is 0,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info