523543

PENTAGRAM Cerberus P 6341 Manual

52
Zoom out
Zoom in
Previous page
1/84
Next page
PENTAGRAM Cerberus P 6341
52
address from your ISP.
Auth. Protocol – Default is Auto. Your ISP should advises you on whether to use Chap
or Pap.
Obtain DNS – Select Automatic check box to receive DNS via DHCP.
Primary / Secondary – Enter the IP addresses of the DNS servers. The DNS servers
are passed to the DHCP clients along with the IP address and the Netmask.
Connection – Check Always On box if you want the router to establish a PPPoA
session when starting up and to automatically re-establish the PPPoA session when
disconnected by the ISP. Uncheck Always On if you want to establish a PPPoA session
only when there is a packet requesting access to the Internet (i.e. when a program on
your computer attempts to access the Internet). In this mode, you must set Idle Timeout
value at same time.
Idle Timeout – Auto-disconnect the broadband firewall gateway when there is no activity
on the line for a predetermined period of time. The minimum value is 10 minutes.
MTU – Maximum Transmission Unit. The size of the largest datagram (excluding media-
specific headers) an IP attempts to send through the interface.
Apply / Edit / Delete – Click this button to apply and save new values to list.
• ADSL / MPoA (RFC 1483/RFC2684, Multiprotocol Encapsulation over
AAL5)
Protocol – Change used protocol.
Description – Your description of this connection.
VPI/VCI – Enter the VPI and VCI information provided by your ISP.
Encap. method – Select the encapsulation format, the default is LLC. Select the one
provided by your ISP.
Encap. mode – Choose whether you want the device to function as bridge mode or
routing mode.
NAT – The NAT (Network Address Translation) feature allows multiple users to access
the Internet through a single IP account, sharing the single IP address. If users on your
LAN have public IP addresses and can access the Internet directly, the NAT function can
be disabled.
IP Address – Your WAN IP address. Leave this at 0.0.0.0 to automatically obtain an IP
address from your ISP.
Netmask – The default is 255.255.255.0. User can change it to other such as
255.255.255.128. Type the netmask assigned to you by your ISP (if given).
Gateway – Enter the IP address of the default gateway.
Obtain DNS – Select Automatic check box to receive DNS via DHCP.
… 52 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for PENTAGRAM Cerberus P 6341 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of PENTAGRAM Cerberus P 6341 in the language / languages: English as an attachment in your email.

The manual is 1,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info