Manual PENTAGRAM Cerberus P 6331-6 (page 33 of 63) (English)

523545

Zoom out

Zoom in

1/63

Cerberus ADSL2 Wi-Fi Plus (P6331-6)

Configuration / System

There are six items within the System section: Time Zone, Remote Access, Firmware

Upgrade, Backup/Restore, Restart and User Management.

• Time Zone

The router does not have a real time clock on board; instead, it uses the Simple Network

Time Protocol (SNTP) to get the current time from an SNTP server outside your network.

Choose your local time zone, click Enable and click the Apply button. After a successful

connection to the Internet, the router retrieves the correct local time from the SNTP

server you have specified. If you prefer to specify an SNTP server other than those in the

drop-down list, simply enter its IP address as shown above. Your ISP may provide an

SNTP server for you to use.

Resync Period (in minutes) is the periodic interval the router waits before it

resynchronizes the router’s time with that of the specified SNTP server. To avoid

unnecessarily increasing the load on your specified SNTP server you should keep the

poll interval as high as possible – at the absolute minimum every few hours or even days.

• Remote Access

To temporarily permit remote administration of the router (i.e. from outside your LAN),

select a time period the router permits remote access for and click Enable. You may

change other configuration options for the web administration interface using Device

Management options in the Advanced section of the GUI.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of PENTAGRAM Cerberus P 6331-6 in the language / languages: English as an attachment in your email.

The manual is 1,75 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

PENTAGRAM Cerberus P 6331-6 Manual

Product: