Manual PENTAGRAM Cerberus P 6331-4 (page 9 of 54) (English)

523549

Zoom out

Zoom in

1/54

Cerberus ADSL Wi-Fi Lite

Resetting router

• Turn router on and wait for ADSL LED to lit or start blinking.

• Press and hold DEFAULT button on the back panel of router for 5-10 seconds and then

release it.

• After reset LEDs will return to their normal behavior and all settings will be reset to their

default value. You can login web configurator using default username and password:

admin / trenchip.

Connecting Cerberus to Computer.

Cerberus can be connected to computer via Ethernet or WLAN:

Connecting via Ethernet Port (Ethernet Card)

If there is an available LAN card present on your PC, you just simply connect ADSL router and

PC through the Ethernet cable. Once you establish Internet connection, you could browse the

Web through the Ethernet cable.

Connecting via WLAN Interface (Wireless Card)

To connect PC to Cerberus via WLAN, Wireless Adapter must be properly installed and

configured and both router and PC must be in the same subnet.

Configure TCP/IP

This part will help you to configure your computer to communicate with Cerberus ADSL Wi-Fi

Lite router properly. Computer must be either equipped with network adapter connected

directly to Cerberus ADSL Wi-Fi Lite router or wireless network adapter (compatible with Wi-Fi

802.11b/g standard). Wireless network adapter must have the same session ID (ESSID) and

establish connection with the network created by router. You can also connect to Cerberus

ADSL Wi-Fi Lite router via network hub/switch. Default IP address of the router is 10.0.0.2 and

subnet mask is 255.0.0.0. Fastest and easiest method to configure your computer is to obtain

an IP address automatically from router’s DHCP server.

Make sure that TCP/IP protocol and network adapter are installed on your computer.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of PENTAGRAM Cerberus P 6331-4 in the language / languages: English as an attachment in your email.

The manual is 1,54 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

PENTAGRAM Cerberus P 6331-4 Manual

Product: