523551

PENTAGRAM Cerberus P 6311-07A Manual

44
Zoom out
Zoom in
Previous page
1/61
Next page
Cerberus P 6311-07A
44
Direction – Choices are Both, Incoming and Outgoing. Select which direction of data
flow you wish to apply the filters to. Note that Incoming and Outgoing are from the point
of view of your router, relative to the interface you select. For WAN, data coming from
outside your system is considered Incoming and data leaving your system is Outgoing.
For LAN, data leaving your system is considered Incoming and data entering your
system is Outgoing.
IP / MAC Filter Rule Index – Select the IP / MAC Filter Rule Index you wish to modify.
Rule Type – Select filtering by IP or MAC address. Appearance of next paragraphs
depends on option you select from this list.
Active – Toggle this rule index on or off with Yes or No, respectively.
Source IP Address – Enter the source IP address you wish to deny access to your
system.
Subnet Mask – Enter the subnet mask of the source IP address.
Port Number – Enter the port number of the source IP address. Note that 0 means all
that ports are allowed.
Destination IP Address – Enter the destination IP address that you wish to deny access
to your system.
Subnet Mask – Enter the subnet mask of the destination IP address.
Port Number – Enter the port number of the destination IP address. Note that 0 means
that all ports are allowed.
Protocol – Select the protocol to filter. Choices are TCP, UDP, and ICMP.
MAC Address (only when MAC is selected in Rule Type option) – enter source MAC
address.
Rule Unmatched – Choices are Forward and Next. Select what happens to the data in
question if the rule you are currently editing is unmatched.
• Next means that the data is then compared to the next IP filter rule.
• Forward means that the data will be allowed into your system. Note that a Forward
rule should be the last rule, as no data will be compared to rules after a Forward
rule.
IP / MAC Filter Set Index – Select the IP / MAC filter set you wish to view.
Please follow below steps to set your IP Filter:
• IP / MAC Filter Set Editing: Choose your IP / MAC Filter Set Index, Interface and
Direction options. Remember, Interface and Direction functions are affected with IP /
MAC Filter Set Index. EX: if your 1
st
index set of IP / MAC filter set PVC0 as
Interface and Outgoing as Direction, so the list of 1
st
IP / MAC Filter will be PVC0
and Outgoing as their settings
• IP / MAC Filter Rule Editing: Select the IP / MAC Filter Rule Index (up to 6
numbers for each set index), select IP as a Rule Type and choose Active option.
As an example, Source IP Address is 192.168.1.10, Subnet Mask is
255.255.255.255, Destination IP Address & Subnet Mask is 0.0.0.0, Port
Number is 80. And, Protocol sets TCP. From this setting, it filters 192.168.1.14, so
it cannot access the web. Notice, each IP / MAC Filter Set Index can has up to 6
filters IP. At “Rule Unmatched” option, you must choose NEXT until the last filter IP
choose Forward.
• After every setting is done, click SAVE to continue next IP / MAC Filter Editing.
… 44 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for PENTAGRAM Cerberus P 6311-07A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of PENTAGRAM Cerberus P 6311-07A in the language / languages: English as an attachment in your email.

The manual is 1,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info