523551

PENTAGRAM Cerberus P 6311-07A Manual

9
Zoom out
Zoom in
Previous page
1/61
Next page
Cerberus P 6311-07A
9
Resetting router
• Turn router on and wait for ADSL LED to lit or start blinking.
• Press and hold DEFAULT button on the back panel of router for 5-10 seconds and then
release it.
• After reset LEDs will return to their normal behavior and all settings will be reset to their
default value. You can login to router configuration page using default username and
password: admin / pentagram.
Connecting Cerberus to Computer.
You can connect ADSL router with PC through either Ethernet cable or USB cable.
Connecting via Ethernet Port (Ethernet Card)
All Ethernet ports of router are made in the technology, which automatically activates
Crossover if necessary. Thanks to autonegotiation of connection speed the router will
automatically select the maximum available speed rate. Transfer at 10/100 Mbit/s rate
requires the category 5 cable wired with RJ-45 connectors. In case of "straight" cable both
connectors must be crimped in standard EIA/TIA 568B. In case of Crossover cable one
connector must be in standard EIA/TIA 56A, and the second in EIA/TIA 568B. After connecting
the device to one of the ports, corresponding LED will begin to blink. That signals the process
of the auto-checking of port and the negotiation of connection speed rate.
Connecting via USB Port
You can connect ADSL router with PC via USB cable when there is no Networking LAN Card
present on your PC. USB cable acts as another LAN connection in this scenario. Once you
establish Internet connection, you can browse the Web through the USB cable.
1. Connect ADSL Router and PC with USB cable.
2. Once “Detect New USB Device” window pops out, click Cancel.
3. Insert Driver CD and in menu click Install USB Driver.
4. Click four times Next. If Program Installation window pops up click Continue anyway.
5. Driver will be installed automatically.
6. Click Finish to end installation.
Network connection should work properly after system restart.
To check if USB device is installed properly, click Start Menu → Control Panel → System →
Hardware tab → Device Manager.
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for PENTAGRAM Cerberus P 6311-07A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of PENTAGRAM Cerberus P 6311-07A in the language / languages: English as an attachment in your email.

The manual is 1,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info