523352

PENTAGRAM Cerberus ADSL Wi-Fi Lite Manual

39
Zoom out
Zoom in
Previous page
1/54
Next page
Cerberus ADSL Wi-Fi Lite
39
Subnet Mask – Enter the subnet mask of the source IP address.
Port Number – Enter the port number of the source IP address. Note that 0 means all that
ports are allowed.
Destination IP Address – Enter the destination IP address that you wish to deny access to
your system.
Subnet Mask – Enter the subnet mask of the destination IP address.
Port Number – Enter the port number of the destination IP address. Note that 0 means that all
ports are allowed.
Protocol – Select the protocol to filter. Choices are TCP, UDP, and ICMP.
Rule Unmatched – Choices are Forward and Next. Select what happens to the data in
question if the rule you are currently editing is unmatched. Next means that the data is then
compared to the next IP filter rule. Forward means that the data will be allowed into your
system. Note that a Forward rule should be the last rule, as no data will be compared to rules
after a Forward rule.
IP Filter Set Index – Select the IP filter set you wish to view.
Please follow below steps to set your IP Filter:
1. IP Filter Set Editing: Choose your IP Filter Set Index, Interface and Direction options.
Remember, Interface and Direction functions are affected with IP Filter Set Index. EX: if
your 1
st
index set of IP filter set PVC0 as Interface and Outgoing as Direction, so the list
of 1
st
IP Filter will be PVC0 and Outgoing as their settings
2. IP Filter Rule Editing: Select the IP Filter Rule Index (up to 6 numbers for each set
index) and choose Active option. As an example, Source IP Address is 10.0.0.10,
Subnet Mask is 255.255.255.255, Destination IP Address & Subnet Mask is 0.0.0.0,
Port Number is 80. And, Protocol sets TCP. From this setting, it filters 192.168.1.14, so
it cannot access the web. Notice, each IP Filter Set Index can has up to 6 filters IP. At
“Rule Unmatched” option, you must choose NEXT until the last filter IP choose
Forward.
3. After every setting is done, click SAVE to continue next IP Filter Editing.
… 39 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for PENTAGRAM Cerberus ADSL Wi-Fi Lite at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of PENTAGRAM Cerberus ADSL Wi-Fi Lite in the language / languages: English as an attachment in your email.

The manual is 1,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info