523352

PENTAGRAM Cerberus ADSL Wi-Fi Lite Manual

30
Zoom out
Zoom in
Previous page
1/54
Next page
Cerberus ADSL Wi-Fi Lite
30
Routing
This table lists IP address of Internet destinations commonly accessed by your network. When
a computer requests to send data to a listed destination, the device uses the Gateway IP to
identify the first Internet router it should contact to route the data most efficiently. Select this
option will list the routing table information. You can press ADD ROUTE to edit the static route.
(As below screen)
ADD ROUTE – click this button to set Static Routing information.
Destination IP Address – This parameter specifies the IP network address of the final
destination of packets routed by this rule.
IP Subnet Mask – Enter the subnet mask for this destination.
Gateway IP Address – Enter the IP address of the gateway. A gateway does the actual
forwarding of the packets. Enter the gateway’s IP address in the field or select which PVC you
wish to act as a gateway. The gateway is an immediate neighbor of your ADSL Router that will
forward the packet to the destination. On the LAN, the gateway must be a router on the same
segment as your Router; over Internet (WAN), the gateway must be the IP address of one of
the remote nodes.
Metric – Metric represents the “cost” of transmission for routing purposes. IP Routing uses
hop count as the measurement of cost, with a minimum of 1 for directly connected networks.
Enter a number that approximates the cost for this link. The number need not to be precise,
but it must between 1 and 15. In practice, 2 or 3 is usually a good number.
Announced in RIP – This parameter determines if the ADSL router includes the router to this
remote node in its RIP broadcasts. If you choose Yes, the router in this remote node will be
… 30 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for PENTAGRAM Cerberus ADSL Wi-Fi Lite at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of PENTAGRAM Cerberus ADSL Wi-Fi Lite in the language / languages: English as an attachment in your email.

The manual is 1,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info