PENTAGRAM Cerberus [P 6367]
Advanced Settings
This section introduces configuration of wireless advanced functions, which enables you to
configure wireless parameters at length, including BG protection mode, basic data rates,
Fragmentation threshold, RTS threshold, and WMM etc.
BG protection Mode: Auto by default. It is good for relatively slow 11b/g wireless clients to
connect 11n wireless network smoothly in a complicated wireless area.
Basic Data Rates: You can select one suitable Basic Data Rate from the drop-down menu
according to your need. The default value is Default(1-2-5.5.-11Mbps). It is recommended not to
modify this value.
Beacon Interval: Set the beacon interval for AP. Generally, the smaller the interval is, the faster
wireless clients connect; the bigger it is, the higher efficiency wireless network data
transmission will achieve. Default value is 100. It is recommended not to modify this value.
Fragment Threshold: The fragmentation threshold defines the maximum transmission packet
size in bytes. The packet will be fragmented if the wireless data packet is bigger than the
threshold setting. The default size is 2346 bytes. It is recommended not to modify this value.
RTS Threshold: RTS is short for Request to Send. When the packet size exceeds this threshold,
enable CTS/RTS to reduce collision possibility. For the long-distance clients to access in
interference involved environment, set a relatively smaller RTS value. It is recommended not to
modify the default value in SOHO environment; otherwise it will affect AP performance.
TX Power: Set the output power of wireless radio. The default value is 100.
WMM Capable: It will enhance the data transfer performance of multimedia data when they’re
being transferred over wireless network. It is recommended to enable it if you are not familiar
with WMM.
APSD Capable: It is used for auto power saving service. The default is Disable.
30
