Manual Pelgrim WA 51 (page 10 of 20) (English, German, Dutch, French)

108341

Zoom out

Zoom in

1/20

ACCESSORIES

ORDERING FILTERS

As with any kitchen appliance,

correct maintenance is

important for the durability of the

cooker hood. If your

extractor hood is fitted with a

fibre filter, this can be replaced

by a was-hable aluminium filter.

This aluminium filter will be sent to

you when ordered in writing or by

telephone.

Ordering accessories

type WA/OWA 10 200 49 50 52 68

MWA 100 48 490 92 900

51 59 600

carbon filter KF 20 KF49 KF20 KF68

aluminium filter AV20 AV 20 * AV20 * *

chimney - - TP49 - TP49 TP68

* supplied

USING YOUR HOB

USING THE OWA 600/900 AND

WA 68

Control switches

Fig. 4

A = general switch

B = light switch

C = speed decrease switch

D = speed increase switch

E = display

Installation

When the hood is first switched

on it runs through a phase of

reset and self-cheking. At the end

of this phase a stand-by phase

will be reached: motor and

lamps will be switched off and

the display will show its lower seg-

ment.

Switching on the hood

Switch on the hood by pressing

switch A. The motor will not run

and the display will show 0. You

will set the motor in motion by

pressing switch D, the display will

show 1.

Change speed by using switches

C and D: by pressing either of

them the speed is immediatly

changed by one step.

Continuous pressure on C and D

at the same time for more than 2

seconds causes the motor to

work at its highest speed for 4

minutes. The display shows 9.

After that the hood will return to

the stand-by mode.

Switching off

Pressing switch A turns the motor

off and the hood will return to its

stand-by mode. When the hood

is switched on again the motor

resumes operation at the speed

previously selected.

Using the hood in recirculation

mode

After resetting, the motor speed is

set for use in the exhaust mode.

In order to select the recirculation

mode one of the following steps

must be taken: pressing switch D

in the stand-by mode shows “A”

on the display. This stands for

selection of the exhaust mode.

Pressing switch C and D at the

same time, while on stand-by,

changes operation to recircula-

tion mode. The display shows “F”.

Any further pressing of C and D

switches will select the exhaust

mode of operation.

Cleaning/replacing filters

After cleaning the grease filter

the bookmark “G” on the display

will disappear by pressing switch

C for more then 10 seconds. After

replacing the carbon filter the

bookmark “C” on the display will

disappear by pressing switch D

for more then 10 seconds.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Pelgrim WA 51 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,12 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Pelgrim WA 51 Manual

Product: