50320

Pelgrim RSK986 Manual

11
Zoom out
Zoom in
Previous page
1/29
Next page
2120
Controls (RSK595/RSK986)
Switching lighting on and off
Press the lighting button .
The lighting comes on.
Press the button again and the lighting goes out.
Switching on the fan
Press the , or button.
The extractor hood comes on at the setting selected. The control light between
the buttons lights up.
Controls (RSK975/RSK981)
Switching lighting on and off
Press the lighting button .
The lighting comes on.
Press the button again and the lighting goes out.
Switching on the fan
Press the button.
The extractor hood switches on.
Change the speed by pressing speed switch or .
321
use
1
2
3
safety
Precautions you must take
■ Have the appliance connected by a qualified fitter (see section "Installation").
■ The metal panels can be removed by pulling them directly downwards. Use
both hands for this purpose.
■ The metal panels get hot during cooking. Wait 30 minutes before start
cleaning the panels after cooking.
■ The power supply must be disconnected before the appliance is cleaned or
repaired. Remove the plug from the socket or switch the electricity off at the
mains.
■ We advise you to switch the cooker hood on before you start cooking. Leave
the cooker hood on for another 5 minutes or so after you have finished
cooking.
■ Fats and oils become inflammable on overheating. Never leave such foods
unattended during preparation.
■ A grease-saturated filter mat is inflammable, so never flambé under the
cooker hood, and clean the filter regularly.
■ Switch off the electricity before replacing the light bulbs! Only use the same
sort of light bulbs with the same Wattage.
■ In view of possible sharp edges on the chimney we advise you to wear
working gloves when fitting the chimney.
Extraction systems
The extractor hood must be connected to a duct.
The cooking vapours extracted by suction are carried outside, once the vapours
have been filtered. The cooker hood is connected to the duct at the top using
the outlet flange supplied.
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pelgrim RSK986 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pelgrim RSK986 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info