2928
installation
Disposal of packaging and appliance
The packaging of the appliance is recyclable. It is made up off:
– cardboard
– polyethylene
– CFC free polystyrene (PS rigid foam)
– polypropylene straps around the box
Please dispose of these materials in a responsible way in accordance with the
regulations of your local authority.
Your local authority will also be able to give you information about disposing
disused household appliances in a responsible way
installation
Mounting the canopy hood (RSK595)
■ First determine the position and
distance with regard to the
mounting brackets. Mark the holes
that must be drilled and drill the
holes.
■ Fix brackets (A) to the wall with the
plugs and screws provided.
■ Screw the hood to the wall with the
plugs and screws (B) provided.
■ On the back of the canopy hood are
2 holes with a diameter of 8 mm for
the 2 plugs/ screws (C) to fix the
hood.
■ Connect the duct.
■ Fit the short cylinder to the
mounting bracket (A) and pull the
long cylinder to the top of the
canopy hood.
■ Screw the chimney in place from the
inside of the canopy hood (remove filters).
Installation of the extractor hood can be simplified by removing the black filter
frame. To do so, unscrew the fastening screws. Once installation is complete,
the filter frame should be replaced.
Technical specifications
See identification plate for technical specifications.