557141

Pelgrim RKE1280L Manual

49
Zoom out
Zoom in
Previous page
1/50
Next page
GB 13
INSTALLATION
Mounting
• Determine the position of the motor unit in relation to the hob and
mark the securing holes.
• Drill the securing holes prior to fitting the motor unit to the ceiling.
• Fit the pegs and first of all screw two screws into the pegs (do not
tighten completely). Hook the motor unit behind the two screws
which are already in place (fig. 1). Centre the motor unit in relation
to the hob. Ensure that the motor unit is aligned in relation to the
hob as it hangs from the ceiling.
• Screw the motor unit tight with the two remaining screws and then
with the two screws which are already in position (fig. 2).
• Connect the plug to the power point on the wall.
• Take care! Disconnect the wall power point from the power supply
before making the electrical connection.
• Fit the waste pipe onto the motor unit.
• Screw the uppermost telescopic channel to the motor unit with 4
screws.
• Push the lowest telescopic channel carefully over the uppermost
telescopic channel in the highest position. Loosen two screws
somewhat and allow the lowest telescopic channel to rest here (fig. 3).
• First of all hook the cooker hood onto 1 side of the motor unit (fig. 4).
• Push the cooker hood upwards and then hook it onto the other side
of the motor unit.
• Push the cooker hood carefully up to the desired height.
• Screw the cooker hood tightly to the motor unit with the two screws
(fig. 5)! Take care; this securing is absolutely essential for
correct fitting!
• Connect the cooker hood onto the motor unit with the plug
connections. Remove the cover (click it off) from the terminal box
and fit the plug connection into the terminal box.
• Fasten the cabling in such a way (with a cable tie) that it does not
rest on the fat filters. (fig. 6).
• Tighten the screws of the uppermost telescopic shaft and then
carefully allow the lowest telescopic shaft to drop onto the cooker
hood.
• Check that the cooker hood is working correctly.
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
… 49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pelgrim RKE1280L at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pelgrim RKE1280L in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 4,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info