557060
37
Zoom out
Zoom in
Previous page
1/44
Next page
37
409016
Failure Possible cause What to do...?
Softener is not
completely rinsed,
or water is left in the
dispenser dish.
• Sucking cover is not
correctly positioned or is
clogged.
• Clean the dispenser and firmly
fix the cover to its place.
Unpleasant smell in the
washing machine drum.
• Remains of fabrics, washing
agent and softener in the
filter.
• Development of germs.
• Check whether the filter is clean.
• Run the auto-clean (SterilTub)
program (see chapter: selecting
additional functions).
Washing time is longer
than usual. Time
indicated on the display
is corrected during the
washing cycle.
• Low temperature of inlet
water.
• The machine switched on
the UKS* system because of
uneven laundry load.
• Low mains voltage.
• There has been a failure in
the power supply.
• Washing program time may be
up to 60% longer; however, this
does not imply a fault in the
machine.
• Washing time is extended by the
power supply down-time
• Additional rinses may prolong
the washing program time.
E2
Washing program does
not start
• At the start of the
washing cycle: washing
time will flash
• Open door or door not
properly closed.
• Close the door by pushing it
towards the machine.
• Push START again.
E3
Water is not supplied to
the machine.
• Water level has not been
reached.
• Disturbed water inlet.
Check if:
• the water tap is open,
• inlet pipe net filter is clean.
• Push the START button.
E6
Program temperature not
reached.
• Heater failure.
• Inlet water too cold.
• Manual addition of water.
• Turn off the appliance and wait
for a few seconds.
• Turn the appliance back on and
repeat the washing program.
• If the failure is reported again,
call a service technician.
E7
Water is poorly pumped
out or not at all.
• Water outlet is clogged. Check if:
• the filter is clean,
• outlet pipe is not jammed,
• the drain is clogged,
• outlet pipe is positioned higher
than 1m.
• Push START again.
* UKS: universal stability control - this function prevents excessive vibrations during
spinning
In case you were not successful in repairing the malfunctions in
spite of the above suggestion chart, call the nearest authorized
service shop. Repairing the failure arising from inappropriate
connections or use of the appliance is not covered by the
guarantee, and the repair expenses are paid by the customer.
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pelgrim PWM110 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pelgrim PWM110 in the language / languages: English as an attachment in your email.

The manual is 3,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pelgrim PWM110

Pelgrim PWM110 User Manual - German - 48 pages

Pelgrim PWM110 User Manual - Dutch - 44 pages

Pelgrim PWM110 User Manual - French - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info