557236

Pelgrim PVD9144M Manual

16
Zoom out
Zoom in
Previous page
1/52
Next page
Before connecting the appliance to
the mains supply, leave it stand for
about 2 hours which will reduce the
possibility of malfunctions in the
cooling system that might have occurred due to
transport handling.
Clean the appliance thoroughly, especially the
interior (see Cleaning and Maintenance).
Instructions for Use
These instructions for use were prepared for the
user. They describe the appliance and its correct
and safe use. They were prepared for various
types/models of appliances therefore you might find
in it description of some functions and accesories
that do not apply to your appliance.
Mounting Instructions
Integrated appliances are equipped with instructions
for mounting the appliance into the kitchen unit.
The appliance should be professionally mounted by
qualified technician and instructions are for his use
only.
We Care for the Environment
Our products use environmentally friendly
packaging, which can be either recycled or
disposed of in an environmentally friendly
manner. To this end, individual packaging
materials are clearly marked.
These instructions are printed either on recycled
paper or chlorine free bleached paper.
When your appliance finally wears out, please try
not to burden the environment with it; call your
nearest authorised service agent. (See Disposing
of the Worn Out Appliance)
Tips for Energy Saving
Try not to open the door too often, especially
when the weather is wet and hot. Once you open
the door, mind to close it as soon as possible.
This is especially important if you have an upright
model.
Every now and then check if the appliance is
sufficiently ventilated (adequate air circulation
behind the appliance).
Turn the thermostat knob from higher to lower
setting as soon as possible (depends on how
loaded the appliance is, ambient temperature...)
Never use continuous operation unless
unnecessarily required; switch the operation
mode selection switch to the setting for
automatic operation as soon as possible.
Before freezing packages of fresh foods, make
sure they are cooled to ambient temperature.
(except for the soup)
Ice and frost layer increase energy consumption,
so do clean the appliance as soon as the layer is
3-5 mm thick.
If the gasket is damaged or if it turns out
that the sealing is poor, the energy consumption
is substantially higher. To restore efficiency,
replace the gasket.
The condenser on the rear wall should be always
clean, free of dust or any impurities.
Always consider instructions stated in sections
Positioning and Energy Saving Tips, otherwise
the energy consumption is substantially higher.
BEFORE PUTTING INTO USE16
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pelgrim PVD9144M at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pelgrim PVD9144M in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info