446686
13
Zoom out
Zoom in
Previous page
1/18
Next page
1/2 inch ISO 228
(straight)
1/2 inch EN 10226-1
(conical)
25
3 Position and arrangement
24
3 Position and arrangement
3.1 Installation
Install the hob on a flat, stable and horizontal base.
Keep a free space of at least 2 cm around the hob.
Do not place any inflammable or deformable objects directly beneath the hob.
3.2 Gas connection
The fitting of the appliance should only be carried out by
a registered Corgi gas fitter.
Please note: the type of gas and the country for which
the appliance has been designed are indicated on the
ratings plate.
This is a category 1 appliance.
The gas connection must comply with national and local
regulations.
A safety hose should be approved and suitable for the
type of gas for which the appliance is adjusted see
rating plate).
The safety hose should not be longer than 2 meter.
Please note: a safety hose may not be bent and must not come into contact with
moving parts of kitchen units.
Please note: a safety hose should not be above the appliance due to the fact that
the flames of the burners could damage the hose.
In all cases the connection tap for the appliance must be
positioned such that it is easily accessible.
before using the appliance for the first time check the
connections using water and washing-up liquid to ensure
that there are no gas leaks.
Please note: the bottom of the hob becomes hot.
3.3 Electrical connection*
230 V - 50 Hz - 1,1 VA
The electrical connection must comply with national and local regulations.
Wall socket and plug must be accessible at all times.
If you want to make a fixed connection, ensure that a multi-pole switch with a
distance between contacts of 3 mm is installed in the supply cable.
Put the plug into the socket.
Make sure that the lead does not come into contact with parts that become hot.
Please note: this appliance must be earthed.
If the connecting cable is damaged, it may only be replaced by the manufacturer,
the manufacturer’s service organisation or equivalently qualified persons, in order to
avoid dangerous situations.
Category I2L
Gas type and pressure G25 / 25 mbar
Country of destination NL
Nominal heat input total 7,5 kW
Nominal heat input rapid burner 3,0 kW
Nominal heat input semi-rapid burner 1,75 kW
Nominal heat input simmer burner 1,0 kW
* Only for gas hobs with spark ignition: PK454 and PK554
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pelgrim PK554 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pelgrim PK554 in the language / languages: English, Dutch as an attachment in your email.

The manual is 1,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info