Manual Pelgrim OWA 200 (page 11 of 20) (English, German, Dutch, French)

109287

Zoom out

Zoom in

1/20

FOR THE FITTER

MOUNTING THE COOKER HOOD

UNDER A KITCHEN CUPBOARD.

Put the kitchen cupboard upside

down on the floor and mark the 4

mounting holes (A) (see fig. 18).

Drill the 4 holes with a diameter

of 4.5 mm.

For top connection only: saw a

hole with a diameter of 130 mm

for the duct opening.

Fix the outlet flange in place and

fix the cooker hood to the bot-

tom of the kitchen cupboard

with the 4 screws.

MOUNTING THE COOKER HOOD

TO A PANEL/WALL

Mark the mounting holes to be

drilled and the hole for the duct.

Make the hole for the duct.

Drill the two mounting holes (A)

(see fig. 19) and fix the plugs and

screws. Hang the cooker hood

on the screws and make sure it is

hanging straight.

Mark the 2 holes (B) and take the

hood off the wall.

Now drill the 2 holes (B) and fix

the plugs. Hang the hood back

on screws (A) and drive the

screws (B) in place.

The models WA 49, OWA 490, WA

52, OWA 600/900 and WA 68 can

be adjusted horizontally with the

clearance screws (C).

Filler should be used for all other

models (behind screw B).

THE UNIVERSAL COOKER HOOD

WITH REMOTE MOTOR WA 10/

MWA 100

This cooker hood can only be

used in combination with a

mechanical ventilation system,

regardless of the brand of motor

unit.

Control methods

A the extraction is regulated with

a switch on the motor unit.

B the motor unit is regulated with

a switch on the cooker hood.

The motor unit

The motor unit must be single

phase (230V-50Hz) with various

speeds. Whichever method of

extraction is selected, it must

never be possible to switch the

motor unit off (see for this only

the motor unit manual).

The various possibilities are often

given in terms of: medium or day

setting, high or cooking setting.

FOR THE FITTER

IMPORTANT THAT YOU KNOW

If the extractor hood is to be fit-

ted to an existing duct, no other

appliances, such as a geyser or

heater, may be connected to

that same duct.

Consider local regulations with

respect to the ventilation of gas

appliances!.

The cooker hood should be

mounted at least 650 mm. above

the hob.

The shorter the duct, and the

fewer the bends in it, the better

the cooker hood will work.

Before you start drilling check

that there are no installation

cables there.

This appliance meet the

european requirements

CEE 89/336 EMC and

CEE 73/23; 93/68 LVD.

FITTING THE CHIMNEY WA 49/

OWA 490

In view of possible sharp edges

on the chimney we advise you to

wear working gloves when fitting

the chimney.

Fix the bracket to the rear wall

with the plugs/ screws (A) (see

fig. 16). Screw the short cylinder

to the bracket. (B). Slide the long

cylinder over the short cylinder

and place this on top of the

cooker hood.

Lower the filter panel and screw

the chimney in place from the

inside of the cooker hood (C).

The T-piece (T) for the recircula-

tion version must be ordered

separately.

FITTING THE CHIMNEY

OWA 600/900 AND WA68

Fix the bracket (1, see fig. 17) to

the hood body by means of the

screws (2). Drill 4 holes in the wall

and fix the hood to the wall with

2 screws (3) through the bracket

and 2 screws (4) in the wall.

Fix the second bracket (5) to the

wall by means of the screws (6).

Place the larger diameter chim-

ney on the hood and fix it to the

lower bracket by means of the

screws (7). Extract the inside

chimney and fix it to the upper

bracket with the screws (8).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Pelgrim OWA 200 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,12 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Pelgrim OWA 200 Manual

Product: