37
Installation
General
When the appliance is not fitted with a power
cord with plug, the appliance may only be
connected by a qualified electician.
please note:
The correct voltage for the appliance and the
connection value are shown on the rating
plate at the back of the oven. Always comply
with local regulations when connecting the
appliance.
U.K. only
To connect the appliance a fixed connection
has to be made. The wire which is coloured
green and yellow must be connected to the
terminal which is marked by the letter E or the
earth symbol or which is coloured green,
or green and yellow. The wire which is
coloured blue must be connected to the
terminal which is marked by the letter N or
which is coloured black. The wire which is
coloured brown must be connected to the
terminal which is marked by the letter L or
which is coloured red. If the input of the
appliance acceeds 3 kW, the appliance has to
be connected to an outlet with a rated current
exceeding 13 Amp.
Electrical connection
230 V -50 Hz.
■ Make sure the appliance has an earth wire
connection. Use good quality cable for
connecting, e.g. H05RRF, 1,5 or 2,5 mm
2
,
with 3 or 5 cores, depending upon the
regulations.
With following colour code:
brown = phase L
blue = phase N
green/yellow = earth ( )
black = neutral or phase
Depending upon the wiring diagram, you
can use the black cores for neutral or a
phase.
The cable must have a plug suitable for a
nominal load of at least 15 A.
If you want to make a fixed connection,
ensure that a multi-pole switch with a
distance between contacts of 3 mm is
installed in the supply cable.
wiring diagrams
■ There is a label showing the wiring
diagrams on the underside of the
appliance.
supply terminals
■ The supply terminals are accessible by
removing the cover plate on the underside.
You can make the cross connections
needed using the jumpers on the terminal
block.
Do not forget to secure the cable with the
cable clamp. Refit the cover plate after you
have secured the cable.
INSTALLATION
36
Cleaning
Enamelled parts
The inside of the oven door, the side panels,
the base of the oven, the baking sheet and the
roasting tin are all completely enamelled.
These are best cleaned with hot, soapy water
or a little liquid detergent (Jif); rinse well with
clean water.
Accessories
Self-cleaning walls can be ordered as an
accessory to this oven. These oven walls
clean themselves at a temperature of 200 °C
and only need to be wiped off with a dry cloth
(accessory package ZR 985).
Chrome
Clean the ridges, the rack and the control
panel with hot soapy water or a little liquid
detergent, rinse with clean water.
Plastic/glass
Use Glassex or a liquid detergent to clean
handles and knobs.
sealing rubber
Clean with hot soapy water and rinse with
clean water.
A tip
Cleaning the oven regularly will prevent
stubborn stains.
Removing parts
We recommend that filter A (see Figure 6) on
the back oven wall be cleaned regularly if you
roast or grill often. The filter can be easily
removed by loosening the screw at the
bottom. The filter can be washed with a dish-
washing detergent or in the dishwasher.
If you want to thoroughly clean the oven, the
ledges can be removed by removing the round
nuts B (see Figure 7).
MAINTENANCE
fig. 6
A
