74928
26
Zoom out
Zoom in
Previous page
1/70
Next page
24
CONTROL
Electronic timer
After the appliance has been connected, or
when the power supply has been interrupted, the
display will show ‘12.00’. LED 4 is blinking (see
fig. 4). The time of day can be set.
Setting the time of day
Press key or until the correct time has
been reached. The set time will be stored in
the memory after 5 seconds. The LED goes
out.
Minute minder
Press ‘SET’ until LED 1 blinks (see fig. 4).
Press key or until the correct minute
minder time has been reached. The set time
will stay on the display. LED 1 lights up
steadily (see fig. 4).
The oven will give a signal when the minute
minder time has lapsed.
Setting the preparation time
Press ‘SET’ until LED 2 blinks (see fig. 4).
Press key or until the correct
preparation time has been reached. The set
time will be stored in the memory after
5 seconds. LED 2 goes out. The time of day
will be displayed.
The oven gives a signal when the preparation
time has lapsed and automatically switches
off. LED 2 is on. Press the key or to stop
the signal.
Setting the end time
Press ‘SET’ until LED 3 blinks (see fig. 4).
Press key or until the correct end time
has been reached. The set time will be
stored in the memory after 5 seconds. LED 3
lights up steadily. The time of day will be
displayed.
The oven gives a signal when the end time
has lapsed and automatically switches off.
LED 3 blinks. Press the key or to stop
the signal.
Switching on and off automatically
You can enter the preparation time and the end
time at which the dish must be ready. Then the
oven switches on and off automatically.
First set the preparation time (see setting the
preparation time) and then the end time (see
setting the end time).
LEDs 2 and 3 light up steadily (see fig. 4). The
time of day will be displayed. The oven gives a
signal when the set time has been reached and
automatically switches off.
Press the key or to stop the signal.
With the ‘SET’ key you can check the set values
during the process and adjust them, if
necessary.
12 34
fig. 4
88015901_HL_OKW953_73_93 11-03-2004 13:43 Pagina 24
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pelgrim OKW 993 RVS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pelgrim OKW 993 RVS in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info