588862
64
Zoom out
Zoom in
Previous page
1/74
Next page
EN 28
MAINTENANCE
Disassembly of the oven door
In normal use, the oven door will not need to be removed. However,
should you want to do this, please follow the instructions below.
Warning! The oven door is very heavy and should be well supported.
1. Open the door and tilt lock A in both hinges fully to the outside.
2. Close the oven door halfway, so that the tension is off of the
springs (the oven door will be at an angle of approximately 30°).
3. Hold the door securely at both sides, move along with the closing
movement of the door, while simultaneously lifting the door.
4. Turn the lower part of the door with the hinges B towards you. The
door has now been removed.
5. Clean the door. The door may optionally be tilted so as to clean the
space between the glass with a soft bottlebrush.
To put the door back in place, proceed in reverse order. The door
hinges are in the extended position.
6. Slide the door hinges into the hinge openings.
7. Tilt the door in the horizontal position and click the hinges in place
by tilting lock A back inwards.
Please note:the hinge protectors must always be secured again after
replacing the oven door.
64


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pelgrim NF1082 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pelgrim NF1082 in the language / languages: English, Dutch as an attachment in your email.

The manual is 1,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info