Manual Pelgrim nf 1150 (page 43 of 92) (English, German, Dutch, French)

327688

Zoom out

Zoom in

1/92

INSTALLATION43

Installation

General

The fitting of the appliance should only be

carried out by a registered Corgi gas fitter.

The appliance is not connected to the flue gas

outlet channel.

Electrical connection 230 V - 50 Hz.

■ The electrical connection must comply

with national and local regulations.

■ Wall socket and plug must be accessible at

all times.

The appliance should always be earthed. Use

good quality cable for connecting e.g. H05RRF,

1,5 or 2,5 mm

, with 3 cores, depending on the

regulations.

With following colour code:

brown = phase L

blue = N

green/yellow = earth (

)

The cable must have a plug suitable for a

nominal load of at least 15 A.

If you want to make a fixed connection, ensure

that a multi-pole switch with a distance

between contacts of 3 mm is installed in the

supply cable.

The cable must not touch any hot parts

(>70 ºC),

Replacing the cable

If the cable becomes damaged, replace it as

follows:

■ Open the junction box (see fig. 16).

■ Unscrew screw “A” from the pull relief.

■ Unscrew the screws from the terminals

and remove the cable.

■ Place a new cable of the same type and

length. To connect the cable, see the

colour code for “Electrical connection”.

■ Secure the cable with screw ”A” of the

pull relief and close the junction box.

fig.16

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Pelgrim nf 1150 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 4,11 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Pelgrim nf 1150 Manual

Product: