Manual Pelgrim MSL 140 (page 8 of 21) (English, German, Dutch, French)

40102

Zoom out

Zoom in

1/21

SAFETY/EXTRACTION SYSTEMS

Control switches

1–fan switch for 3 speed settings

2–control light

3–light on/off

4–speed switch

5–light on/off

6–fan on/off

7–max. speed

8–off

9–min. speed

10 – display for electronic switch with 4

positions

SLK 810 / ISW 700

SLK 700 / MSL 140

SLK 750 / 950

Intensive setting SLK 750/950

You can set the extractor hood to an intensive

setting. The extractor hood then operates at full

power for five minutes.

Set the speed switch to setting 4. Then press the

speed switch again and the intensive setting will

be switched on (the red LED comes on).

Visor switches

For cooker hoods with a visor

The visor switches only work if the light and

fan switches are switched on. If you pull the

visor 1/3 open the light will go on. If it is fully

opened the fan will switch on. In reverse

order everything will be switched off.

Electronic regulation of speed

The regulation of the speed of the extractor

hoods is controlled by a microprocessor.

Should any function problem arise, you can

reset the electronics by interrupting the

power supply for two to three seconds (by

removing the plug from the socket).

USE

Precautions you must take

■ Have the appliance connected by a

qualified fitter (see section "Installation").

■ The power supply must be disconnected

before the appliance is cleaned or

repaired. Remove the plug from the socket

or switch the electricity off at the mains.

■ When cooking, the hob becomes hot,

children should always be kept at a

distance.

■ Fats and oils become inflammable on

overheating. Never leave such foods

unattended during preparation.

■ We advise you to switch the cooker hood

on before you start cooking. Leave the

cooker hood on for another 5 minutes or so

after you have finished cooking.

■ A grease-saturated filter mat is

inflammable, so never flambé under the

cooker hood, and clean the filter regularly.

■ Replacing the light bulbs: first switch the

electricity off! Only use the same sort of

light bulbs with the same Wattage.

Extraction systems

Some cooker hoods can be connected in one

of two ways:

■ To a duct (A), the cooking vapours

extracted by suction are carried outside,

once the grease particles have been

filtered. This is the best method.

■ As a recirculation hood, the grease

particles and the smell in the extracted

vapours are filtered and the air streams

back into the kitchen through the

opening (B).

max

min

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Pelgrim MSL 140 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,25 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Pelgrim MSL 140 Manual

Product: