109304
9
Zoom out
Zoom in
Previous page
1/19
Next page
INSTALLATION
15
Wiring example A
Motor unit Setting Combination
low I low
medium II medium
high III high
-IVhigh
Because of the maximum number of wires per
pipe this method of wiring will limit the
possibilities (supply from above).
Wiring example B
Motor unit Setting Combination
night I night or low
day low II low or high
day high III low or high
-IV low or high
Electrical connection
Remove the screening plate (in some
models).
Remove the attached flex and plug if the
ventilation unit is to be operated via the
canopy hood.
Make the electrical connection according
to the wiring diagram you have drawn up.
Fix the phase to clamp L, the neutral to
clamp N, and the switching wires
according to the diagram.
Check all switch functions.
14
INSTALLATION
Motorunit/moteur
A1 A2 A3 A4 A5 A6 A7 A8
hoog
high
hoch
élevée
midden
medium
mittel
moyenne
laag
low
niedrig
faible
N L
12345678
9
LN10
NLA6 A4
Motorunit/moteur
B1 B2 B3 B4
nacht
night
Nacht
nuit
hoog
high
hoch
élevée
laag
low
niedrig
faible
dag
day
Tag
jour
NL
12345678
9
LN10
NLB2 B3
nacht/ night/ Nacht/ nuit
hoog
high
hoch
élevée
12345678
9
LN10
NLB4 B3
laag/ low/ niedrig/ faible
hoog
high
hoch
élevée
Motor unit
This cooker hood can only be used in
combination with a mechanical ventilation
system, regardless of the brand of motor unit.
Control methods
There are two control methods:
The extraction is regulated with a switch
on the motor unit.
The motor unit is regulated with a switch
on the cooker hood.
The motor unit
The motor unit must be single phase (230 V-
50 Hz) with various speeds. Whichever
method of extraction is selected, it must never
be possible to switch the motor unit off (see
for this only the motor unit manual). The
various possibilities are often given in terms
of: medium or day setting, high or cooking
setting.
Switch types:
bipolar slide switch (MSK675 / 975)
- 4 or 10 contacts
- 2 or 4 stages
- push-on connector or solder
bipolar push button switch (MSK986)
- 9 contacts
- 3 stages (I, II, III)
Wiring the canopy hood
Once you have decided on the control method
we advise you to draw up a wiring diagram
and then to wire the cooker hood accordingly.
1
2
3
4
5
6
7
8
9
10
IIIIII IV
S2
12345678910LN
netsnoer + stekker
mains flex + plug
Netzschnure + Stecker
fill d'alimentation + fiche de prise de courant
Klemmenstrook (bij aflevering)
Clamp strip (included)
Anschlussblöcke (bei Ablieferung)
Bornes de raccordement (à la livraison)
lampschakelaar
light switch
Lampenschalter
interrupteur
d'éclairage
lampschakelaar
light switch
Lampenschalter
interrupteur d'éclairage
987654321
ALN
netsnoer + stekker
mains flex + plug
Netzschnure + Stecker
fill d'alimentation +
fiche de prise de courant
Klemmenstrook (bij aflevering)
Clamp strip (included)
Anschlussblöcke (bei Ablieferung)
Bornes de raccordement (à la livraison)
lampschakelaar
light switch
Lampenschalter
interrupteur d'éclairage
La
L7
8
9La
N4 3
2
1
5
6
III
II
I
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pelgrim MSK 975 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pelgrim MSK 975 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info