FAULTS
108
If you have a query concerning the operation of your appliance, this does not necessarily mean that
there is a breakdown. In all events, check the following points:
You notice that Solution
The time is counting down but the appliance
is not functioning (the food is not heated)
and “
demo” flashes in the display.
Demonstration
mode has been set. To switch
back into operating mode, press the following
three keys all at the same time:
The appliance does not switch on.
Check that the appliance is properly connected.
Check that the oven door is properly closed.
Check that the child lock feature
is not programmed.
The appliance continues to make a noise
after the programme has finished.
In order to evacuate residual steam, your
appliance is equipped with a delayed ventila-
tion feature. According to the cooking mode
chosen (solo/grill/combined), the ventilation
may continue to function after the end of the
programme.
The appliance is noisy.
The turntable does not revolve properly.
Clean the rollers and the roller area under the
turntable.
Check that the rollers are correctly posi
tioned.
You notice steam on the glass. Wipe off the condensation with a cloth.
The food is not heated in the microwave
programme.
Check that the utensils are suitable for fuse
with microwave ovens and that the power
level is appropriate.
Smoke comes off the grill at the start
of the programme.
Remove all cooking residues from the heat-
ing element before each use.
The appliance produces sparks.
Clean the appliance thoroughly: remove
grease, cooking particles, etc.
Make sure no metal objects are close to the
oven walls.
Never use metal objects with the grill.
Never operate your oven when it is empty.
