772112
32
Zoom out
Zoom in
Previous page
1/96
Next page
EN 10
OPERATION
Set the time
When the appliance is connected to the network for the first time, you need to set the time.
The display shows ‘0:00’. The clock runs as long as the combi-microwave is connected to the
network.
1. Press the clock button.
The hours flash in the display.
2. Press the adjustment buttons to set the hours (0-23).
The set hours appear in the display.
3. Press the clock button again.
The minutes flash in the display.
4. Press the adjustment buttons to set the minutes (0-59).
The set minutes appear in the display.
5. Press the clock button again.
The clock is set: the current time appears in the display with a flashing ‘:’.
While cooking a dish, press the clock button to view the current time.
Kitchen timer
The kitchen timer gives a signal after reaching the set time.
1. Press the kitchen timer button.
The display shows ‘00:00’.
2. Press the adjustment buttons to set the time (max. 95 min.).
The display indicates the set time.
3. Press the start button.
The set time counts down in the display. When the set time has been reached, the current
time appears again in the display, and you will hear 5 beeps.
You cannot adjust the set time during countdown. Press on the pause/stop button to
interrupt the kitchen timer and set a new time.
Quick start
With one press of the start button you can start the microwave on full power for 30 seconds.
If you press more times on the start button, the time will increase in steps of 30 seconds to a
maximum of 95 minutes.
You can also first press the adjustment button on the left to set a time. Then press the start
button and the microwave will switch on with full power for the set amount of time.
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pelgrim MAC113 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pelgrim MAC113 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1.15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info