109306
11
Zoom out
Zoom in
Previous page
1/21
Next page
Handleiding
Manual
Anleitung
Notice d’utilisation
Schouwkappen
Canopy hoods
Wandhauben
Hottes chéminées
LSK 945 / 975 / 980 / 980D / 986 / 996 / 998
LSK 986 alu
SKE 905
88013411
Nederlands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 -9
English . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 - 19
Deutsch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 - 29
Français . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 - 39
Introductie
Als u deze gebruiksaanwijzing doorleest, bent
u snel op de hoogte van alle mogelijkheden
die dit toestel u biedt. U vindt informatie voor
uw veiligheid en over het onderhoud van het
toestel.
Bewaar de gebruiksaanwijzing en het
installatievoorschrift. Een eventueel volgende
gebruiker van dit toestel kan daar zijn
voordeel mee doen.
Inhoud NL
Veiligheid . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Waar u op moet letten . . . . . . . . . . . . . . . . 2
Afvoersystemen . . . . . . . . . . . . . . . . . . . . . 2
Bediening . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Koolstoffilters vervangen . . . . . . . . . . . . . . 4
Onderhoud . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Lampen vervangen . . . . . . . . . . . . . . . . . . . 5
Reinigen . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Installatie . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Algemeen . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Montage schouwkap . . . . . . . . . . . . . . . . . 6
Montage eilandschouwkap . . . . . . . . . . . . 8
Technische gegevens . . . . . . . . . . . . . . . . 9
Afvoeren verpakking en toestel . . . . . . . . 9
Dit toestel voldoet aan de voorschriften van de richtlijn
89/336/EEG inzake elektromagnetische compatibiliteit.
1 INHOUD
Doelmatig en Stijlvol
2 VEILIGHEID/AFVOERSYSTEEM
3
Waar u op moet letten
Laat het toestel aansluiten door een erkend
installateur (zie hoofdstuk "Installatie").
Bij reparatie of schoonmaakbeurten moet
het toestel stroomloos gemaakt worden.
Neem de stekker uit het stopcontact of
draai de schakelaar in de meterkast op nul.
Bij koken of braden wordt de kookplaat
heet, dus altijd kinderen uit de buurt
houden.
Vet en olie zijn bij oververhitting brandbaar.
Blijf in de buurt tijdens het bereiden van
gerechten.
Voordat u met koken begint de afzuigkap
inschakelen. Na het koken de afzuigkap
nog ca. 5 minuten aan laten staan.
Een met vet verzadigd filter is brandbaar.
Nooit onder de afzuigkap flamberen en op
tijd het filter schoonmaken.
Maak eerst het toestel stroomloos als u de
lampen wilt vervangen! Gebruik uitsluitend
dezelfde lampen met aangegeven wattage.
In verband met eventuele scherpe randen
van de ombouwkoker adviseren wij u om
tijdens de montage van de koker
werkhandschoenen te gebruiken.
De randen van het filterraam kunnen
scherp zijn. Monteer de meegeleverde
beschermstrips op de randen van het
filterraam.
Afvoersystemen
Afhankelijk van het type kan de afzuigkap op
twee manieren worden aangesloten:
Op een afvoerkanaal.
De aangezogen kookdampen worden naar
buiten afgevoerd, nadat de vetdeeltjes
gefilterd zijn. Dit is de beste manier! De
afzuigkap wordt aangesloten aan de
bovenzijde met behulp van het bijgesloten
aansluitpijpmondje op het afvoerkanaal.
Als circulatiekap.
De vetdeeltjes en de geur uit de
aangezogen kookdampen worden gefilterd.
De aangezogen lucht wordt niet afgevoerd
maar circuleert via T-stuk (B) door de
roosters (A) van de koker in de keuken. U
moet dan wel een koolstoffilter plaatsen.
BEDIENING
Bediening
Ingebruikname
Als u de afzuigkap voor de eerste keer
gebruikt, start de kap in de testfase. Aan het
eind van deze fase schakelt de kap over naar
de stand-by fase. De verlichting en de motor
worden uitgeschakeld.
LSK 945 / 975 / 980 / 980 D / 986/ 998 / 996
Verlichting in- en uitschakelen
Druk op de toets voor de verlichting .
De verlichting gaat branden.
Druk nogmaals op de toets en de verlichting
gaat uit.
Ventilator inschakelen
De afzuigkap wordt ingeschakeld door op
toets te drukken.
Wijzig de snelheid door motorsnelheids-
schakelaars of te drukken.
Intensiefstand
U kunt u de afzuigkap tijdelijk in de hoogste
stand inschakelen, bijvoorbeeld om snel de
geur af te voeren als er iets aangebrand is.
Druk op toets om de intensiefstand in te
schakelen. De afzuigkap schakelt gedurende 5
minuten in op zijn hoogste stand (4) en keert
daarna terug naar de oorspronkelijke stand.
Timer
Druk gedurende 2 seconden op schakelaar
, of . De afzuigkap blijft nog 5
minuten ingeschakeld op de gekozen stand,
daarna worden de afzuigkap en de verlichting
automatisch uitgeschakeld.
Uitschakelen
Schakel de kap uit door op toets te
drukken. De kap schakelt over naar stand-by.
Als u de kap weer inschakelt gaat de motor
draaien met de laatst gekozen snelheid.
LSK 986 Alu / SKE 905
Verlichting in- en uitschakelen
Druk op de toets voor de verlichting .
De verlichting gaat branden.
Druk nogmaals op de toets en de verlichting
gaat uit.
Ventilator inschakelen
De afzuigkap wordt ingeschakeld door op
toets te drukken.
Wijzig de snelheid door motorsnelheids-
schakelaars of te drukken. De
snelheid wordt met één stap verlaagd of
verhoogd.
B
A
A
ONDERHOUD
5
Lampen vervangen
Halogeenverlichting
Schuif de vergrendeling (1) in de aangegeven
richting en klap het deksel (2) naar beneden.
Trek de lamp (3) in de pijlrichting uit de houder
en plaats de nieuwe lamp. Druk het deksel
weer vast. Denk erom dat wanneer u het
lampje vervangt u er niet met de handen aan
komt, aangezien direct contact met de huid tot
gevolg kan hebben dat het lampje doorbrandt.
Reinigen
Afzuigkap
De afzuigkap kunt u schoonmaken met een
sopje en een zachte doek, daarna met schoon
water nabehandelen. Gebruik geen agressieve
schoonmaakmiddelen zoals bijvoorbeeld soda.
Niet behandelen met schuursponsjes of
andere schuurmiddelen. Nabehandelen met
Stahlfix en met de structuur van het
roestvrijstaal meepoetsen.
Filters
Aluminiumfilters elke week reinigen in een
sopje. Het aluminiumfilter wordt door de
reinigingsmiddelen dof, dit is normaal.
Koolstoffilters zijn niet uitwasbaar voor
hergebruik.
4 FILTERS
Koolstoffilters vervangen
Het koolstoffilter moet worden toegepast als
de afzuigkap niet op een afvoerkanaal wordt
aangesloten (zie Afvoersystemen, blz. 2).
Let op:
Het koolstoffilter moet minimaal 2x per jaar
worden vervangen, afhankelijk van het
gebruik van de afzuigkap.
Koolstoffilters zijn niet uitwasbaar voor
hergebruik.
Verzadigd koolstof is niet milieuvriendelijk,
vervang het filter tijdig.
Filterrooster verwijderen
Netspanning uitschakelen! De stekker uit het
stopcontact nemen of de schakelaar in de
meterkast op nul zetten. Trek het rooster naar
u toe en kantel het naar voren toe omlaag.
Indicatie en werking van de filterverzadiging
(LSK 945 / 975 / 980 / 980D/ 986 / 998 / 996)
De verzadigingsgraad van het vetfilter wordt
aangegeven door middel van het lichtgevende
display.
Als de afzuigkap is uitgeschakeld en wanneer
toets wordt ingedrukt, licht het display op;
de kleuren ervan hebben de volgende
betekenis:
groen licht: minder dan 6 bedrijfsuren
geel licht: tussen 6 - 12 bedrijfsuren
rood licht: meer dan 12 bedrijfsuren (het
vetfilter moet worden schoongemaakt of,
indien nodig, worden vervangen).
Koolstoffilter aanbrengen
Plaats éénmalig het frame van de startset. Het
koolstofilter (C) op de aangegeven manier in
het frame plaatsen en de filterroosters weer in
de afzuigkap plaatsen.
C
1
3
2
INSTALLATIE
7
Voor een correcte installatie moet de
afzuigkap met 2 schroeven (O) vanaf de
binnenkant van de kap aan de muur
worden bevestigd.
Sluit nu de afzuigkap aan op het
elektriciteitsnet van uw woning.
Breng de beschermstrips over de
filterranden in de kap aan.
Verwijder het folie van de filters.
Afvoerpijp aansluiten
Bepaal de plaats en de afstand met
betrekking tot de ophangbeugel (B). Teken
de te boren gaten af op de wand en boor
de 2 gaten.
Bevestig de beugel aan de wand met
behulp van de 2 schroeven (A).
Wordt het circulatiesysteem toegepast,
dan T-stuk (G) monteren in plaats van een
afvoerpijp.
Bevestig de korte buis (D) aan de
montagebeugel (C) met behulp van
2 schroeven (B).
Plaats 2 kooimoeren in de uitsparingen van
de koker (E), die aan het onderste gedeelte
van de koker te vinden zijn.
Schuif nu de koker (E) over de binnenste
koker (D) door de twee zijstukken iets uit
elkaar te trekken.
Draai nu 2 schroeven (Q) vanaf de
binnenkant van de afzuigkap in de
kooimoeren van de koker (E).
Elektrische aansluiting
Controleer of de op het typeplaatje
vermelde spanning overeen komt met de
spanning van de huisinstallatie.
Let op: Wilt u een vaste aansluiting maken,
zorg er dan voor dat er een omnipolaire
schakelaar met een contactafstand van
minimaal 3 mm in de toevoerleiding wordt
aangebracht.
Kleur van de draden:
- groen/geel = aarde
- blauw = fase N
- bruin = fase L
6 INSTALLATIE
Algemeen
De aansluiting van dit apparaat op het lichtnet
moet worden uitgevoerd door een erkend
installateur die de juiste veiligheids-
voorschriften kent en toepast. Het apparaat
voldoet aan de Europese voorschriften
CEE 89/336 EMC en CEE 73/23; 93/68 LVD.
Belangrijk om te weten:
Als de afzuigkap wordt aangesloten op een
bestaand afvoerkanaal, mogen geen
andere apparaten op dat kanaal
aangesloten zijn (zoals een geiser of
kachel).
Denk aan de plaatselijk geldende
voorschriften met betrekking tot de
beluchting van gasapparaten.
Monteer de afzuigkap altijd boven het
kookgedeelte met een minimale afstand
van 650 mm.
Hoe korter de afvoerpijp en hoe minder
bochten des te beter de werking van de
afzuigkap.
Controleer voordat u met boren begint of er
geen installatieleiding(en) aanwezig zijn.
Het aansluitpijpmondje van de schouwkap
heeft een diameter van 150 mm. Hoewel er
een verloopstuk 150/125 mm beschikbaar
is, adviseren wij u een afvoerkanaal van
150 mm te plaatsen. Een kleinere diameter
heeft een lagere afzuigcapaciteit en een
hoger geluidsniveau tot gevolg.
Montage schouwkap
Bepaal de plaats en de afstand met
betrekking tot de schouwkap. Houd
rekening met de minimale afstand van
650 mm tussen de kookplaat en de
schouwkap. Teken de te boren gaten af op
de wand en boor de 2 gaten.
Bevestig de schouwkap aan de wand met
behulp van de 2 schroeven en pluggen (N).
Bevestig de 2 flenshelften (H) met behulp
van de 2 schroeven (I) en schroef de flens
(H) op de bovenkant van de motorgroep (L)
met de 4 schroeven (I).
C
A
A
D
B
B
E
G
F
N
L
I
I
H
O
N
Q
3
2
Afvoeren verpakking en toestel
De verpakking van het toestel is recyclebaar.
Gebruikt zijn:
karton
poly-ethyleenfolie (PE)
CFK-vrij polystyreen (PS-hard-schuim)
polypropyleen banden om de doos
Deze materialen op verantwoorde wijze en
conform de overheidsbepalingen afvoeren.
De overheid kan u ook informatie verschaffen
over het op verantwoorde wijze afvoeren van
afgedankte huishoudelijke apparaten.
Technische gegevens
Zie gegevensplaatje voor technische
gegevens.
TECHNISCHE GEGEVENS
9
Montage eilandschouwkap
Controleer of het plafond geschikt is voor een
degelijke ophanging van de constructiekoker.
Bepaal eerst plaats en afstand met
betrekking tot de constructiekoker. Maak
een doorvoer in het plafond van 140 mm
voor de afvoerpijp.
Als de doorvoeropening voor de aansluit-
kabel (onderzijde constructiekoker 1) naar
u toegericht is, dan zitten de bedienings-
schakelaars rechts van u.
Boor 4 gaten van 10 mm voor de pluggen en
schroef de constructiekoker tegen het
plafond.
Druk de 2 flenshelften (2) stevig op elkaar,
zodat de klikverbinding tot stand komt en
schroef vervolgens de samengestelde flens
(2) op de schouwkap.
Schuif de binnenkoker (3) over de
kokerconstructie tot aan het plafond en
bevestig de koker met 2 schroeven (4).
Schuif dan de buitenkoker (5) er op.
Bevestig de schouwkap aan de koker-
constructie met de vier M6 schroeven (6).
Maak de elektrische aansluiting en let op
de kabeldoorvoer.
Bevestig nu de buitenkoker (5) met
2 schroefjes aan de afzuigkap. Dit doet u
vanuit de binnenzijde van de afzuigkap.
Breng de beschermstrips over de
filterranden in de kap aan.
Verwijder de folie van de filters.
8 INSTALLATIE
4
3
5
2
1
6
Introduction
When you have read these instructions for
use, you will quickly be aware of all the
facilities the appliance can offer you. You can
read about safety and how you should look
after the appliance. In addition you will find
environmental tips and instructions that can
help to save energy.
Keep the instructions for use and the
installation instructions. Any later user of this
appliance could benefit from them.
Table of contents
Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Precautions you must take . . . . . . . . . . . 12
Extraction systems . . . . . . . . . . . . . . . . . .12
Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Replacing carbon filters . . . . . . . . . . . . . . 14
Maintenance . . . . . . . . . . . . . . . . . . . . . . . 15
Changing the light bulbs . . . . . . . . . . . . . . 15
Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Installation . . . . . . . . . . . . . . . . . . . . . . . . 16
General . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Mounting the canopy hood . . . . . . . . . . . 16
Mounting canopy hood above an
island . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Technische specifications . . . . . . . . . . . 19
Disposal of packaging and appliance . . 19
This appliance complies the regulations concerning
electromagnetic compatibility in directive 89/336/EEC.
TABLE OF CONTENTS
11
10
Precautions you must take
Have the appliance connected by a
qualified fitter (see section "Installation").
The power supply must be disconnected
before the appliance is cleaned or
repaired. Remove the plug from the socket
or switch the electricity off at the mains.
When cooking, the hob becomes hot,
children should always be kept at a
distance.
Fats and oils become inflammable on
overheating. Never leave such foods
unattended during preparation.
We advise you to switch the cooker hood
on before you start cooking. Leave the
cooker hood on for another 5 minutes or so
after you have finished cooking.
A grease-saturated filter mat is
inflammable, so never flambé under the
cooker hood, and clean the filter regularly.
Switch off the electricity before replacing
the light bulbs! Only use the same sort of
light bulbs with the same Wattage.
In view of possible sharp edges on the
chimney we advise you to wear working
gloves when fitting the chimney.
Extraction systems
Depending on the type, the cooker hoods can
be connected in one of two ways:
To a duct.
To a duct, the cooking vapours extracted
by suction are carried outside, once the
grease particles have been filtered. This is
the best method. The cooker hood is
connected to the duct at the top using the
outlet flange supplied.
Recirculation hood.
As a recirculation hood, the grease
particles and the smell in the extracted
vapours are filtered. The air that has been
sucked in is not carried outside but
recirculates in the kitchen, via the T-piece
(B) and the grilles in the chimney (A). In
this case you must have a carbon filter
fitted.
12
SAFETY/EXTRACTION SYSTEMS
13 USE
B
A
A
Use
After installation
When the hood is switched on for the first
time, it runs through a phase of reset and self-
checking. At the end of this phase a stand-by
phase will be reached: motor and lamps will
be switched off.
LSK 945 / 975 / 980 / 980 D / 986/ 998 / 996
Switching lighting on and off
Press the lighting button .
The lighting comes on.
Press the button again and the lighting goes out.
Switching on the fan
The hood is switched on by pressing
switch .
Change the speed by pressing speed
switch or .
Intensive setting
You can temporarily switch the extractor hood
to the highest setting - in order, for example,
to remove the odour quickly if something has
burned.
Press switch to switch to the intensive
setting. The extractor hood switches to its
highest setting (4) for 5 minutes, and then
switches back to the original setting.
Timer
Press switch , or for 2 seconds.
The extractor hood remains at the selected
setting for 5 minutes, after which the extractor
hood and the lighting are automatically switched
off.
Switching off
Pressing switch turns the motor off and
the hood will return to its stand-by mode.
When the hood is switched on again, the
motor resumes operation at the previously
selected speed.
LSK 986 Alu / SKE 905
Switching lighting on and off
Press the lighting button .
The lighting comes on.
Press the button again and the lighting goes out.
Switching on the fan
The hood is switched on by pressing
switch .
Change the speed by pressing speed
switch or . The speed is decreased or
increased by one step.
15
MAINTENANCE
Changing the light bulbs
Slide the cath (1) in the direction indicated
and fold the cover (2) downwards. Pull the
bulb (3) in the direction of the arrow and out of
the holder, then fit the new bulb. Take care
not to touch the bulb with your hands when
you replace it, since direct contact with the
skin can result in the bulb burning out.
Cleaning
Cooker hood
Clean the cooker hood with soapy water and a
soft cloth, then wipe with clean water to rinse.
Do not use aggressive cleaning agents such
as soda.
Do not use any sort of scourer. Treat with
Stahlfix (supermarket) and polish with the
structure of the stainless steel.
Filters
Wash aluminium filters, every week in
soapy water. The cleaning agents will
make the aluminium filter turn dull, this is
normal.
The carbon filters cannot be cleaned to use
again.
Replacing carbon filters
The carbon filter must be used if the cooker
hood is not connected to a duct (see
extraction systems on page 12).
Note:
The carbon filter must be replaced at least
twice a year, depending on how much the
cooker hood is used.
Carbon filters cannot be cleaned to use
again.
Saturated carbon is harmful to the
environment, replace the filter regularly.
Removing the filter panel
Switch off the electricity! Remove the plug
from the socket or switch the electricity off at
the mains. Pull the grille towards you and tilt it
downwards at the front.
Display and functioning of the filter
saturation indicator
(LSK 945 / 975 / 980 / 980D / 986 / 998 / 996)
The degree of saturation of the grease filter is
indicated by means of a luminous display. If
button is pressed when the extractor hood
is switched off, the display lights up; the
colours displayed have the following
meanings:
green light: in use for less than 6 working
hours
yellow light: in use for 6 to 12 working
hours
red light: in use for more than 12 working
hours (the grease filter should be cleaned
or, if necessary, replaced)
Fitting the carbon filter
Place the frame of the start set once. Place
the carbon filter (C) in the frame in the way
that is shown and fit the filter panels in the
hood.
14 FILTERS
C
1
3
2
17
16
INSTALLATION
To install the extractor hood correctly, fix
the hood to the wall from the inside with
2 screws (O).
Now connect the extractor hood to the
electricity supply in your home.
Attach the protective strips over the edges
Remove the film from the filters.
Connect the duct
First determine the position and distance
with regard to the fixing bracket (B). Mark
the holes that must be drilled and drill the
2 holes.
Fix the bracket to the wall with the screws
(A) provided.
If the recirculation system is to be applied,
mount the T-piece (G) instead of a duct.
Fix the short pipe (D) to the mounting
bracket (C) using 2 screws (B).
Place 2 cage nuts in the openings of the
duct (E), which can be found on the bottom
part of the duct.
Place duct (E) over the inner duct (D) by
pulling the two side pieces slightly apart.
Now screw 2 screws (Q) into the cage nuts
of the duct (E) from the inside of the
extractor hood.
Electrical connection
Make sure the supply voltage ratings
correspond with those stated on the
appliance data plate.
Attention: If you want to make a fixed
connection, ensure that a multi-pole switch
with a distance between contacts of 3 mm
is installed in the supply cable.
The appliance must be connected to a
system equipped with earth or ground
plate.
Colour of the wires:
- green/yellow = earth
- blue = phase N
- brown = phase L
INSTALLATION
General
This appliance should be connected to the
power supply by a recognized fitter who is
familiar with, and works according to the
correct safety regulations. This appliance
meets the European requirements CEE 89/336
EMC and CEE 73/23; 93/68 LVD.
Important that you know
If the cooker hood is to be fitted to an
existing duct no other appliances, such as
a geyser or heater, may be connected to
that same duct.
Consider local regulations with respect to
the ventilation of gas appliances!
The cooker hood should be mounted at
least 650 mm. above the hob.
The shorter the duct, and the fewer the
bends in it, the better the cooker hood will
work.
Before you start drilling check that there
are no installation cables present.
The diameter of the outlet flange is 150 mm.
Although an adapter 150/125 mm is
available, we recommend that an extractor
duct measuring 150 mm be installed. A
smaller diameter results in a lower
extracting capacity and a higher noise
level.
Mounting the canopy hood
First determine the position and distance
with regard to the canopy hood. Consider
the minimum distance of 650 mm between
the cooking area and the hood. Mark the
holes that must be drilled and drill the
4 holes.
Fix the hood to the wall with the 2 plugs
and screws (N) provided.
Mount the two flange halves (H) with the
2 screws (I) and then fix the flange (H) to
the upper part of the motor group (L) with
the 4 screws (I) of the filter in the hood.
C
A
A
D
B
B
E
G
F
N
L
I
I
H
O
N
Q
3
2
Disposal of packaging and
appliances
The packaging of the appliance is recyclable.
It is made up off:
cardboard
polyethylene
CFC free polystyrene (PS rigid foam)
polypropylene straps around the box
Please dispose of these materials in a
responsible way in accordance with the
regulations of your local authority.
Your local authority will also be able to give
you information about disposing disused
household appliances in a responsible way.
Technical specifications
See identification plate for technical
specifications.
TECHNICAL SPECIFICATIONS
19
Mounting the canopy hood above
an island
Make sure that the ceiling is suitable for the
suspension of the construction chimney.
First determine the position and distance
with regard to the chimney. Make a 140 mm
hole in the ceiling for the duct.
If the opening for the flex (bottom of the
chimney construction 1) is pointed towards
you, then the control switches will be to
your right.
Drill 4 10 mm holes for the plugs and screw
the chimney against the ceiling.
Press the 2 flange halves (2) firmly
together, so that the snap connection is
made and then screw the assembled flange
(2) to the canopy hood.
Slide the inner cylinder (3) over the
chimney construction up to the ceiling and
fix it with 2 screws (4). Then slide the outer
cylinder (5) on.
Fix the canopy hood to the chimney
construction with the 4 M6 screws (6).
Make the electrical connection and
observe the flex opening (1).
Now fix the outer cylinder (5) to the cooker
hood with 2 screws, this is done from the
inside of the cooker hood.
Attach the protective strips over the edges
of the filter in the hood.
Remove the film from the filters.
18 INSTALLATION
4
3
5
2
1
6
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pelgrim LSK 996 RVS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pelgrim LSK 996 RVS in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info