130167

Pelgrim lsk 900 Manual

16
Zoom out
Zoom in
Previous page
1/30
Next page
12
INSTALLATION
■ If the recirculation system is to be applied,
mount the T-piece (C) instead of a duct.
■ Fit the short cylinder to the mounting
bracket (B) and pull the long cylinder to the
top of the canopy hood.
■ Screw the chimney in place from the inside
of the canopy hood (remove filters).
Electrical connection
■ Connect the two lamp connectors to the
motor connector.
■ Connect the connector of the slide box to
the remaining motor connector.
■ Make sure the supply voltage ratings
correspond with those stated on the
appliance data plate.
■ Attention: If you want to make a fixed
connection, ensure that a multi-pole switch
with a distance between contacts of 3 mm
is installed in the supply cable.
■ The appliance must be connected to a
system equipped with earth or ground
plate.
■ Colour of the wires:
- green/yellow = earth
- blue = phase N
- brown = phase L
Mounting the canopy hood above
an island
See fig. 9. Make sure that the ceiling is
suitable for the suspension of the construction
chimney.
■ First determine the position and distance
with regard to the chimney. Make a 140
mm hole in the ceiling for the duct.
■ If the opening for the flex (bottom of the
chimney construction 1) is pointed towards
you, then the control switches will be to
your right.
■ Drill 4 10 mm holes for the plugs and screw
the chimney against the ceiling.
■ Press the 2 flange halves (2) firmly
together, so that the snap connection is
made and then screw the assembled flange
(2) to the canopy hood.
■ Slide the inner cylinder (3) over the
chimney construction up to the ceiling and
fix it with 2 screws (4). Then slide the outer
cylinder (5) on.
■ Fix the canopy hood to the chimney
construction with the 4 M6 screws (6).
■ Make the electrical connection and
observe the flex opening (1).
■ Now fix the outer cylinder (5) to the cooker
hood with 2 screws, this is done from the
inside of the cooker hood.
Technical specifications
Type LSK 950/980/990/990G/991995 SKE 900 SKE 925
Power 230 V - 50 Hz X X X
Nominal capacity W 250 240 290
Motor W 210 210 210
Lighting W 2xhalo 20 2xTL 15 4xhalo 20
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pelgrim lsk 900 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pelgrim lsk 900 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info