692079
37
Zoom out
Zoom in
Previous page
1/44
Next page
EN 7
Grease filter indicator
The ‘S1’ warning lamp lights when the grease filter must be
cleaned.
The warning lamp lights after 100 hours of use. This indicates
that the grease filter must be cleaned.
Reset the signal lamp by touching the ‘T3’ key for 3 seconds.
The ‘S1’ warning lamp flashes 3x to confirm that the signal has
been reset.
Carbon filter indicator
Activate the carbon filter fouling indicator by touching the ‘L’ key for
5 seconds.
The 4 LED indicators will flash 2x as confirmation.
The ‘S1’ warning lamp flashes after 200 hours use of the cooker
hood (when the carbon filter fouling indicator has been activated)
to warn that the carbon filter must be replaced.
Switch the indication off by touching the ‘L’ key again for
3 seconds.
The 4 LED indicators flash 1x as confirmation.
Activating the remote control
Touch the T4 key for 5 seconds.
The remote control is activated.
The T4 LED flashes 1x.
Operating using the remote control
A1
A2 A3
A5
L1
A4
USE
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pelgrim ISW0960 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pelgrim ISW0960 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pelgrim ISW0960

Pelgrim ISW0960 Installation Guide - English, German, Dutch, French - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info