Manual Pelgrim iso 610 (page 18 of 38) (English, German, Dutch, French)

329327

Zoom out

Zoom in

1/38

MAINTENANCE

Removing the door

To make the oven easier to clean, the door

can be removed.

Removal: Open the door completely. Let

handle B fall over stop C for both hinges. The

hinge is now locked. Grab the door with both

hands and pull it towards you at a 45° angle.

Replacement: Insert the hinges in the slots.

Let the door sink open, while supporting it.

Release latch B from catch C on both hinges.

Now the door can be closed.

Tip

By cleaning the oven regularly, you will

prevent stubborn stains.

Replacing the oven light bulb

Unscrew the protective cover (A) in an

anticlockwise direction.

Replace the bulb with a new one of the same

wattage.

Screw the protective cover back on, in a

clockwise direction.

MAINTENANCE

Cleaning

Please note:

Disconnect the appliance before starting with

cleaning or reparation. Preferably by taking

the plug out of the socket or by turning off the

mains switch.

Enamelled parts

The inside of the oven door, the base of the

oven, the baking sheet and the roasting tin are

all completely enamelled. These are best

cleaned with hot, soapy water or a little liquid

detergent (Jif); rinse well with clean water.

Outside

Clean the outside of the oven with warm soapy

water or liquid soap. Rinse with clean water.

Glass

Clean the glass in the oven door with soapy

water or with a glass-cleaning product.

Grill screen

You can easily pull the grill screen out of the

oven and clean it with a wet cloth.

Self-cleaning function (pyrolysis)

■ Remove all accessories from the oven. The

oven heats to a temperature of nearly

500 °C during the self-cleaning cycle. The

heat can be trapped under the baking

sheet and damage the bottom of the oven,

or the accessories can become

discoloured.

■ Clean the inside of the door with soap and

close the door.

■ Select the self-cleaning function by turning

the function knob to .

■ We recommend that you keep the kitchen

well ventilated during the self-cleaning

cycle.

Remarks

The first time you use the self-cleaning

function, you may experience an unpleasant

smell, due to residue from the protective

coating used during assembly (this coating is

completely safe).

The oven starts operating immediately. During

the cleaning cycle, the oven makes more

noise than usual. Pressing the button

displays the cleaning cycle end time. The

cleaning cycle (including cooling time) takes

at least 1.5 hours. When the cleaning cycle

begins, the thermostat indicator light comes

on. The oven heats to a temperature of 500 °C;

then the thermostat indicator light goes out.

As long as the oven temperature is above

300 °C, the oven door cannot be opened. The

control light alerts you that the cleaning cycle

is in process. The cleaning cycle time can be

set from a minimum of 1.5 hours to a maximum

of 3 hours.

■ Clean the oven (once it has cooled). You

can wipe away the ash and any other

residue with a damp cloth.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Pelgrim iso 610 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,48 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Pelgrim iso 610 Manual

Product: