692055
29
Zoom out
Zoom in
Previous page
1/60
Next page
EN 15
General
The electrical connection must be carried out ONLY by qualified technicians.
The electrical protection of the electrical connection upstream of the equipment must comply
with the regulations in force.
The aspiration system is composed by two appliances:
Connect the appliances to a permanent connection.
Make sure that the voltage (V) and frequency (Hz) indicated on the serial number plate
located on the appliances correspond to those available at the installation site.
Any change to the electrical installation necessary to install the hood should only be
undertaken by competent person.
The electrical connection of the appliance must follow the diagram, according to the voltage
of the electricity network.
To make a fixed connection to the network, a omnipolar interruption device must be
interposed between the unit and the network. This device must ensure a separation of
contacts, providing a complete disconnection in the category III overvoltage conditions.
After installation, insulated parts and those carrying electricity must be protected from any
possible contact.
CAUTION! If the electrical connection is carried out incorrectly or not meeting the
regulations, it may damage part of the appliance and the warranty will not respond.
CAUTION! Before any intervention, disconnect the appliance from the power mains.
These devices must be connected to an earthed system.
Electrical connection of the induction hob
The connection terminals can be reached after opening the conductors cover.
The plate with all the technical data is located at the bottom of the hob.
Connect the protective cable to the terminal marked with the earth cable symbol.
The connecting cable must pass through the bracket protecting it from accidental strain.
After connecting the appliance, turn on all cooking zones / heaters for approximately three
minutes to make sure they are operating correctly.
Connection cable on the back of the appliance should be led in such way that it does NOT
touch the appliance back wall, as this part will get very hot during operation.
Connection load
L1 (W) L2 (W) L3 (W) Total load hob (W) Total load hood (W)
3700 3700 7400 275
ELECTRICAL CONNECTION
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pelgrim IKR2083 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pelgrim IKR2083 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 5,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pelgrim IKR2083

Pelgrim IKR2083 Additional guide - English - 28 pages

Pelgrim IKR2083 User Manual - English - 52 pages

Pelgrim IKR2083 Additional guide - German - 28 pages

Pelgrim IKR2083 User Manual - German - 52 pages

Pelgrim IKR2083 Additional guide - Dutch - 28 pages

Pelgrim IKR2083 User Manual - Dutch - 52 pages

Pelgrim IKR2083 Additional guide - French - 28 pages

Pelgrim IKR2083 User Manual - French - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info