692055
24
Zoom out
Zoom in
Previous page
1/60
Next page
EN 10
Hob installation
Prepare the hole in the worktop and fix the induction hob as shown according to the dimensions
indicated (see ‘Built in dimensions’).
Non-flush installation
1. Before inserting the appliance into the hole in the kitchen worktop, the supplied foam gasket
must be attached to the lower side of the glass.
CAUTION! Do not install the appliance without the foam gasket!
Warning! The gasket should be attached to the appliance in the following way:
Remove the protective film from the gasket.
Attach the gasket to the lower side approximately A=2-3 mm from the edge. The gasket
must be attached along the entire length and should not overlap at the corners.
05
A
A
Flush installation
1. Lay in silicone sealant flush with the hole where the milling was done and set the hob in place.
Tape
Tape
Tape
Kit
INSTALLATION
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pelgrim IKR2083 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pelgrim IKR2083 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 5,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pelgrim IKR2083

Pelgrim IKR2083 Additional guide - English - 28 pages

Pelgrim IKR2083 User Manual - English - 52 pages

Pelgrim IKR2083 Additional guide - German - 28 pages

Pelgrim IKR2083 User Manual - German - 52 pages

Pelgrim IKR2083 Additional guide - Dutch - 28 pages

Pelgrim IKR2083 User Manual - Dutch - 52 pages

Pelgrim IKR2083 Additional guide - French - 28 pages

Pelgrim IKR2083 User Manual - French - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info