53731
66
Zoom out
Zoom in
Previous page
1/71
Next page
129
4 Maintenance
4.2.7 Resetting factory default settings
If you change the original values, the factory default values can be reset as follows:
Press the 1. MENU button. Then press the NEXT button repeatedly until the appliance
displays RESET TO DEFAULT NO.
Press the 2. CHANGE button and the appliance displays RESET TO DEFAULT YES.
Press the 3. OK button to reset the factory default values.
Press the 4. MENU button to exit the programming mode or NEXT to change other
parameters.
4.2.8 Changing the language
To change the language, proceed as follows:
Press the 1. CHANGE button for at least 5 seconds until the appliance displays: PRESS
OK TO INSTALL ENGLISH.
Then press the 2. OK button for at least 3 seconds to confi rm. The appliance then
displays the setting message in English.
128
4.2.6 Setting the water hardness
The DESCALE message is displayed after the appliance has been operated for a factory
set period of time calculated on the basis of the maximum quantity of lime scale which
may be contained in the water used. If necessary, this period of operation can be
extended, making descaling less frequent, by programming the appliance based on the
actual lime content in the water used. Proceed as follows:
Remove the “Total Hardness Test” strip (in front of your manaul). Then dip it fully in 1.
the water for a few seconds. Remove it and wait around 30 seconds (until it changes
colour and a number of red dots are formed). For example, if there are 3 red squares
on the test strip, you must set the water hardness level to 3.
If you no longer have a water hardness test, you can fi nd the data in the table
below.
Press the 2. MENU button. Then press the NEXT button repeatedly until the appliance
displays WATER HARDNESS 4.
Press the 3. CHANGE button repeatedly until the number coincides with the number of
red squares on the test strip.
Press the 4. OK button to confi rm the value. The coffee maker is now programmed to
provide the descaling warning when necessary, based on the actual hardness of the
water.
Information on the hardness of the water in your area can be obtained from the
local water board. In the table below you can fi nd the water hardness setting your
machine requires.
German hardness French hardness Water hardness
espresso maker
0 - 6 dH 0 -11 fH 1
7 - 13 dH 12 - 17 fH 2
14 - 20 dH 18 - 36 fH 3
> 21 dH > 37 fH 4
4 Maintenance
66


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pelgrim IKM640 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pelgrim IKM640 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pelgrim IKM640

Pelgrim IKM640 User Manual - English, German, Dutch, French - 71 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info