53731
64
Zoom out
Zoom in
Previous page
1/71
Next page
125
4 Maintenance
4.2 Changing and setting the menu parameters.
The following menu parameters and functions can be changed by the user:
Clock;
Auto-start time;
Descaling process;
Coffee temperature;
Length of time the appliance remains on;
Water hardness;
Factory default values.
4.2.1 Setting the clock
To set the clock, proceed as follows:
Press the 1. MENU button then press the NEXT button repeatedly until the appliance
displays CLOCK.
Press the 2. CHANGE button to set the clock. (If you hold the CHANGE button down,
the time is changed rapidly).
Press the 3. OK button to confi rm the value.
Press the 4. MENU button to exit the programming mode or NEXT to change other
parameters.
When the appliance is in stand-by, you can see the hour by pressing one of the 5.
buttons (except the on/off button).
4.2.2 Setting auto-start time
This enables the time the appliance will come on automatically to be programmed.
Make sure the clock on the appliance is set as described above.1.
Press the 2. MENU button then press the NEXT button repeatedly until the appliance
displays START TIME.
Press the 3. CHANGE button to set the auto-start time. (If you hold the CHANGE
button down, the time is changed rapidly).
Press 4. OK to confi rm the value.
Press 5. NEXT once and the appliance displays the message AUTO-START NO.
Press the 6. CHANGE button to modify the function (the appliance displays AUTO-
START YES).
Press the 7. OK button to activate auto-start.
Press the 8. MENU button to exit the programming mode or the NEXT button to
change other parameters.
124
After having heard the click, check that the red buttons have 8.
snapped out, otherwise the door cannot be closed.
The two red buttons have snapped out correctly º
(CORRECT, fi g. 25).
The two red buttons have not snapped out º
(WRONG, fi g. 26).
Notes
If the infuser is not inserted correctly until it clicks into place and the two red buttons
have not snapped out, the service door cannot be closed.
If it is hard to insert the infuser, before inserting it squeeze
it to the right size by pressing it forcefully from the top and
bottom simultaneously, as shown in fi g. 27.
If it is still hard to insert the infuser:
Leave it out of the appliance, place the drip tray, close the service door, switch º
the main switch on the back of the appliance to 0 and then to l again.
Wait for all the lights to go off, then open the door, remove the drip tray and º
replace the infuser.
Replace the drip tray, complete with the grounds container. º
Close the service door. º
4 Maintenance
25
26
27
64


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pelgrim IKM640 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pelgrim IKM640 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pelgrim IKM640

Pelgrim IKM640 User Manual - English, German, Dutch, French - 71 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info